Recently we became aware due to a server outage that some of our physical servers do not have sensors for the hard drives. Through our LANDesk management console I have identified all of our physical servers and need to compare that against the sensors we have in place to find which servers are missing sensors.
I have tried to pull reports with PRTG and that gives me way too much data. There is so much that I am still learning about PRTG and its capabilities that I am finding more about every day. However, I have been tasked to get this addressed as soon as possible by my boss and I feel with all of its capabilities PRTG is probably able to do so.
I saw that one of the report options the ability to export to a csv and that would be ideal. but at this point I am spinning my wheels trying to find the solution. The process doesn't necessarily have to be a report just some type of data extraction with a list. I am open to suggestions. Any help would be appreciated.
Article Comments
Hello acewarner,
thank you for your inquiry.
While reports would work for this, reports are designed to review historic data. If you just want to see a list of "current" data/sensors/things, you can use for instance the Sensors > By Type menu, to locate all sensors of a specific type, but CSV is also possible.
For a list of existing HP Proliant Physical disk sensors, please use:
https://prtg/sensors.htm?filter_type=snmphpphysicaldisk&columns=name,device,status,lastvalue,message
For a list of existing HP Proliant Physical disk sensors in CSV, please use:
https://prtg/api/table.xml?content=sensors&output=csvtable&filter_type=snmphpphysicaldisk&columns=name,device,status,lastvalue,message
Please replace https://prtg/ with the actual URL of your PRTG Server. You should also login first and authenticate, because this data is only visible to logged-in users.
You can find further details about the API on the following URL or within your PRTG's web-interface under Setup > PRTG API.
Best Regards,
Luciano Lingnau [Paessler Support]
Jul, 2018 - Permalink
Thanks! That worked like a champ.
Jul, 2018 - Permalink
Hello acewarner,
thank you for your inquiry.
While reports would work for this, reports are designed to review historic data. If you just want to see a list of "current" data/sensors/things, you can use for instance the Sensors > By Type menu, to locate all sensors of a specific type, but CSV is also possible.
For a list of existing HP Proliant Physical disk sensors, please use:
For a list of existing HP Proliant Physical disk sensors in CSV, please use:
Please replace https://prtg/ with the actual URL of your PRTG Server. You should also login first and authenticate, because this data is only visible to logged-in users.
You can find further details about the API on the following URL or within your PRTG's web-interface under Setup > PRTG API.
Best Regards,
Luciano Lingnau [Paessler Support]
Jul, 2018 - Permalink