I used portsensor, httpsensor, ping, each one failes with timed out/down, but the camera is working perfectly, I configured it with a static ip, this only happens to the cameras i got every other device and my server works fine no issue at all???
I got networked Camera Hikvision which sensor is suited for it?
Modified on 2025-06-10 22:34:06 +0200
Disclaimer:
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
The information in the Paessler Knowledge Base comes without warranty of any kind. Use at your own risk. Before applying any instructions please exercise proper system administrator housekeeping. You must make sure that a proper backup of all your data is available.
It could be possible that the device does't respond to ICMP packets. If it features SNMP, you might want to use the MIB file from hikvision. I found this one. You should be able to monitor the camera with the SNMP Library Sensor, given that the MIB file matches the device.
Here's a Knowledge Base Article that describes the setup of SNMP Library Sensors.
There's also a video that shows how to do that :)
Feb, 2016 - Permalink