kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I have PRTG configured to bring in Netflow data for a Cisco Meraki MX95, but I am noticing that it shows traffic between internal VLANs configured on it. For my use case, I need to see traffic on the WAN and Client VPN interfaces. Would I...
Tue, 10 Jun, 2025 at 8:10 PM
Since 22.2.77 roundtrip sensor doesn't work properly:
Sending Mail: <MyPrtgMachineName>: Helo command rejected: need fully-qualified hostname
I set a correct HELO identifier in the mail-setup of prtg (https://myprtgserver/syste...
Tue, 10 Jun, 2025 at 8:10 PM
Hi,
we use PRTG in several countries spread over the world and therefore in different time zones. The timely display of the sensors is based on UTC + time zone from my account settings. We would rather prefer that a probe has it's own t...
Tue, 10 Jun, 2025 at 8:10 PM
Hey
Can i use regex in a device template?
Article Comments
Hello,
Thanks for contacting us.
I understand that you would like to know if you can use regex for device templates, correct?
- Can you provide more details about ...
Tue, 10 Jun, 2025 at 8:10 PM
I use a powershell script (EXE/XML sensor) to monitor scheduled tasks on windows servers. As long as I use local admins (on the remote systems) everything works fine. But I don't want to use local admins for obvious reasons, so I tried ...
Tue, 10 Jun, 2025 at 8:10 PM
Hi Support,
I'm trying to get my hands on my Unify Open Scape Business phone system. We need to monitor how many trunk lines are free and how many are busy. One can see this within the web gui of the phone system, however I could not ...
Tue, 10 Jun, 2025 at 8:10 PM
Hi,
We've got a bunch of servers which we monitor with PRTG. All the physical disks of all servers must be monitored. In a few cases there is no sensor applied to a disk.
With the PRTG API I can put up a list with all servers and all th...
Tue, 10 Jun, 2025 at 8:10 PM
Hello everybody,
did anyone of you succesfully change the font color of system status symbols?
I'd checked the related KB articles but didn't find a solution.
If anyone of has experiences with this topic, please help me.
Thank you...
Tue, 10 Jun, 2025 at 8:10 PM
Hi,
Is there a simple way of getting a report from PRTG that will show me all my customers and the devices they have please?
Thanks
Gavin
Article Comments
Hi Gavin,
You may want to check the following KB https://helpdesk...
Tue, 10 Jun, 2025 at 8:10 PM
Hello,
Does someone have a solution to check status of an hybridbackup status on Qnap :-/
Thanks
Article Comments
Tue, 10 Jun, 2025 at 8:10 PM
I use the SNMP printer sensor to monitor the status of a printer. How can I change the toner percentage displayed? Currently it shows with "Not Empty" At a threshold of 10% it should send a notification that the toner is about to ...
Tue, 10 Jun, 2025 at 8:10 PM
I have received a new PRTG Enterprise Monitor license key from Paessler. How do I replace my old license key in my PRTG Core Server installation to use the new license key?
Article Comments
This article applies as of PRTG 22
...
Fri, 6 Jun, 2025 at 11:27 AM
Hello,
is it possible to host static htm files on PRTG server use the files in iframe of prtg maps?
I tried placing them to webroot/public, but the frame gets never refreshed, only after prtg server gets restarted.
Article Comment...
Tue, 10 Jun, 2025 at 8:10 PM
How can I add custom text fields to a device? In the example, an inventory number is to be added to a switch or the date of purchase or the supplier of the device or a telephone number etc.
Article Comments
Hello TechnikOnkel,
...
Tue, 10 Jun, 2025 at 8:10 PM
Q.1: I need to find the duplicate sensors configured in PRTG, pls share the steps.
Q.2: I want to generate report in Excel format of configured sensors in a Group, pls share the steps.
Article Comments
Hello Rahul,
Please ref...
Tue, 10 Jun, 2025 at 8:10 PM
Our FTP server automatically creates a new log file each day. I'd like to use the "File Content Sensor" (https://www.paessler.com/manuals/prtg/file_content_sensor.htm) to check the newest file each day. I tried to use the (*...
Tue, 10 Jun, 2025 at 8:10 PM
I have been running a small installation of PRTG for some time, and have over a year's worth of data collected.
I'm looking at a licensed version of PRTG moving forward. My preference is for a hosted solution, but I need to migra...
Tue, 10 Jun, 2025 at 8:10 PM
I would like to monitor the toner level of printers. For this I added the devices via the IP address. I have created the sensor SNMP printer. It now shows me all possible channels of the printer. For example, whether the printer is open or ...
Tue, 10 Jun, 2025 at 8:10 PM
Hello there,
I am working to import thousands of devices into PRTG with specific sensors and interface targets. This means thousands of "SNMP Traffic" sensors.
What are the options for Sensor->"Alias Availability"
I h...
Tue, 10 Jun, 2025 at 8:10 PM
Hello,
After upgrading PRTG to version 22.2.77.2204, one of our HTTP sensors is no longer working and throws an error message of:
HTTP/1.1 406 Not Acceptable
The sensor had been working prior to updating PRTG to version 22.2.77.2204...
Tue, 10 Jun, 2025 at 8:10 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to have improved functionality for the ...
Tue, 10 Jun, 2025 at 8:10 PM
I am looking to monitor our software maintenance contract expiration dates in PRTG. Is there a way to set up some type of sensor that would monitor a date, similar to the SSL "Days to Expiration" channel? Maybe it would read a tex...
Tue, 10 Jun, 2025 at 8:10 PM
Guten Morgen zusammen,
nach dem Update auf die 22.2.77.2204+ habe ich bei 2 von 40 http Sensoren folgende Fehlermeldung:
Error connecting with SSL. EOF was observed that violates the protocol
Vom PRTG-Server kann ich ohne Probleme die be...
Tue, 10 Jun, 2025 at 8:10 PM
Good morning!
I would like to create a sensor that can see my RDS Farm server and tell me which users are connected.
Could someone please help me with the process and type of Script
Thanks!!!
Article Comments
Hello,
You can re...
Tue, 10 Jun, 2025 at 8:10 PM
I have setup prtg on a new server and i am getting "request timed out icmp 11010" error on most of the nodes,
Article Comments
Hello,
I took a look at the error message in question, and we've answered this before...
Tue, 10 Jun, 2025 at 8:10 PM
I need to create a data dump for a list of my sensors. I would prefer to export the sensor list into an XML Format, but will settle for .CSV. I'm currently playing around with the API v2, but am having a difficult time in trying to figu...
Tue, 10 Jun, 2025 at 8:10 PM
How can I display a PING in a MAP as a graph.
When I drag a live graph onto the ping object, I get the message incompatible object type
Article Comments
I meen a live graph. 2 and 30 day works
Aug, 2022 - Permalink
Hi th...
Tue, 10 Jun, 2025 at 8:10 PM
Is PRTG affected by CVE-2022-0778? If so, is there a fix available?
Article Comments
This article applies to PRTG 22.1.75.1569(+) and earlier versions.
In response to the vulnerability in the OpenSSL library, we at Paessler...
Tue, 10 Jun, 2025 at 8:09 PM
Hi,
Can we configure SMS notification with API link not using username and password
Thanks
Article Comments
Hello,
Thank you for your message.
From the Notification Delivery menu (Setup > System Aministration), if you...
Tue, 10 Jun, 2025 at 8:09 PM
Is there anybody who has successfully set up Veeam Backup Job Status or Advanced Veeam Backup Job Status sensor?
Mine both are showing only the number of Scheduled Jobs, other channels are showing only zeroes.
Article Comments
...
Tue, 10 Jun, 2025 at 8:09 PM
Hallo,
we need to keep track the expiry time of all certificates on a given server and I would like to ask what would be the ideal sensor/configuration for this case.
I tried using the OID snmpcustomtable sensor and it listed all the c...
Tue, 10 Jun, 2025 at 8:09 PM
Is it possible to create a trigger based upon the state of another trigger....say I have a sensor monitoring a server as up / down...and I also have sensors for objects on that server...so if the server is 'down' then all of the oth...
Tue, 10 Jun, 2025 at 8:09 PM
Hi,
We have temperature sensors in our PRTG system for our Data center.
Right now the threshold is set to 26.0 degrees. but sometimes the sensor can give values of 26.1, 26.2 back to 25.9 back to 26.0. resulting in the system spamming a...
Tue, 10 Jun, 2025 at 8:09 PM
Hi everyone,
we have 12 Cisco Access Points and a Cisco WLC Controller. SNMP is enabled on the WLC and I can already access it on PRTG.
I would like to see the up- and download speed and total traffic of each access point in PRTG. How ...
Tue, 10 Jun, 2025 at 8:09 PM
Greetings,
I currently have a Factory Sensor gathering info from a few error log counter sensors which sums up all the entries as a numeral and divides it by 30 (wanting to get a breakdown of per minute error count for the past 30 minutes...
Tue, 10 Jun, 2025 at 8:09 PM
I have multiple SNMP sensors that were created using the default Port Name Template settings. When I tried to rename multiple sensors under Muti-Edit mode, the field names (like [ifname] and [ifalias]) does not work and are treated like reg...
Tue, 10 Jun, 2025 at 8:09 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to monitor the status of my Mailstore. ...
Tue, 10 Jun, 2025 at 8:09 PM
Hi,
We have two groups, one type of Users, the other Administrators. Both are set to read/write user type. Administrators have write to all objects, and Users have read. The Administrators group is set to Administrative Rights.
Accounts...
Tue, 10 Jun, 2025 at 8:09 PM
can you monitor aws via transit gateway. thanks in advance
Article Comments
Hi Marco,
There are not native sensors for the AWS Transit Gateways in PRTG. Still you can monitor your AWS hosts separately by directly monitoring th...
Tue, 10 Jun, 2025 at 8:09 PM
I have 2 Extreme/Brocade MLX routers, with different DIA connections. I not only want to monitor each port but also see a stacked/aggregated port/graph to see overall Traffic?
Article Comments
Hello there,
Thanks for your KB p...
Tue, 10 Jun, 2025 at 8:09 PM
I want to monitor my Rittal Computer Multi Control version 3 (CMC III) monitoring system, Rittal power distribution units (PDU), and my Rittal IoT interfaces with PRTG. Which sensors does PRTG include and what do I need to know?
Art...
Tue, 10 Jun, 2025 at 8:09 PM
Hi Paessler team,
can PRTG monitor ospf routing on comware?
Thanks
Article Comments
Hi there,
Thank you very much for your question. While there are no native sensors for OSPF routing, you might find a working approach her...
Tue, 10 Jun, 2025 at 8:09 PM
Hi,
With a custom sensor, it would sometimes be helpful if the output text in the upper field appeared in bold font or in a different color.
Is that possible?
I mean the text that is output via <text>xxx</text>.
"<p...
Tue, 10 Jun, 2025 at 8:09 PM
After Windows Server update our PRTG server could not fetch the SNMP data from updated devices. Result of investigation of manual updates, the update KB5015874 is the cause of this problem. Did someone faced against this problem?
Ar...
Tue, 10 Jun, 2025 at 8:09 PM
Hello,
I hope someone might be able to spot what is going wrong or encountered a similar issue. I have a powershell script that I use to output JSON, but I've also tried XML. Regardless of what I'm using it keeps giving the error:...
Tue, 10 Jun, 2025 at 8:09 PM
Hi,
I have a custom script for a sensor. If PRTG is running the request it will add a 0 (Null) after the </prtg>-Tag. If I run the script manually I get the xml-response without this 0... what could this 0 add?
- We use the same ...
Tue, 10 Jun, 2025 at 8:09 PM
It would be nice to see the device name at least, maybe the host IP as well. It's not very useful as it is.
Article Comments
Hello Bill, such info pages are always a trade-off. The gauges view focuses on the current sensor v...
Tue, 10 Jun, 2025 at 8:09 PM
Does this protect me
From getting ddos?
Article Comments
Hello Musah,
Thank you for the post, PRTG is used by customer in many was, some use it to monitor critical devices and bandwidth, you could be notified as soon as a devi...
Tue, 10 Jun, 2025 at 8:09 PM
Problem description
Currently there is no way to change the summarization of messages in notification templates. This means that if you want to use the same template for multiple groups it can lead to a mix of devices from various g...
Tue, 10 Jun, 2025 at 8:09 PM
Greetings,
I would like to setup a sensor for an element within this webpage:
https://rainwise.net/weather/mary062697
In the upper left is a status: "Online"
<span id="status" class="on">Online&l...
Tue, 10 Jun, 2025 at 8:09 PM
Hi
I have a rootca / server i want to monitor if its switched on - it is supposed to be switched off all the time. If its on, i want to have a down alarm.
So kind of a reverse ping! If its ping'able it should generate an alarm.
Ho...
Tue, 10 Jun, 2025 at 8:09 PM
Hello all,
I need a script to monitor a pending reboot after a windows update on my systems.
Until now I have a pure Powershell script but this is not yet adapted to PRTG. The inputs and outputs do not fit yet.
I have very little kn...
Tue, 10 Jun, 2025 at 8:09 PM
Hello all,
I need a script to monitor a pending reboot after a windows update on my systems.
Until now I have a pure Powershell script but this is not yet adapted to PRTG. The inputs and outputs do not fit yet.
I have very little know...
Tue, 10 Jun, 2025 at 8:09 PM
Hi all
I have my Nimble setup and being monitored, but I want to also monitor the space on a volume and cannot figure how to do it.
Has anyone managed this and if so, how/
Article Comments
Hi Wayne,
Please check if the vend...
Tue, 10 Jun, 2025 at 8:09 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want native sensors for monitoring HP Nimble...
Tue, 10 Jun, 2025 at 8:09 PM
If i want to track file change in a specific folder. I created a foldersensor and give path to desired folder.
Folder in question containing spaces in the name. now i always get a "folder not found" PE032 error. What am i missing...
Tue, 10 Jun, 2025 at 8:08 PM
Hi Everyone,
I want to setup a SNMP custom Sensor to read voltage of my generator battery, but it shows me the integer value, and I want to monitor as decimal value.
For example:
Battery Voltage expected: 12.1 V
SNMP Query shows: INT...
Tue, 10 Jun, 2025 at 8:08 PM
Hi Guys
According to this article https://helpdesk.paessler.com/en/support/solutions/articles/62199-how-can-i-use-prtg-to-trace-the-route-to-a-target , I put the powershell script on remote probe , but when I create the sensor , it shows t...
Tue, 10 Jun, 2025 at 8:08 PM
Can Paessler please create built in PRTG sensors for Eaton's UPSs, just like there are sensors for APC
Article Comments
Hello,
to request a Feature for PRTG please follow our guide for requesting new features here.
Kin...
Tue, 10 Jun, 2025 at 8:08 PM
How do i setup prtg so when i do a device scanning no notification is sent out?
Thanks
Article Comments
Hello,
So, it's not possible to disable the tickets created when PRTG scans for devices as these are included in log...
Tue, 10 Jun, 2025 at 8:08 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to monitor certificates. th...
Tue, 10 Jun, 2025 at 8:08 PM
Dear Team,
I tried to generated the report for minute wise . But was unable. Kindly guide me to create the minute wise report for 1 hour.
Thanks,
Kiran
Article Comments
Do you use the report feature from PRTG? In this case, yo...
Tue, 10 Jun, 2025 at 8:08 PM
Hey All,
I'm onto Monitoring a bunch vulnerability Data from an internal Website.
I have to sign into the API via https://Website/api/v1/auth/signin which in Postman worked
but the Data comes from a different URL: https://Website/api...
Tue, 10 Jun, 2025 at 8:08 PM
Is there anyway to force all the boxes in the tree map to be the same size. We want to make this map public but want things to look nice. I have tried manipulating the overall size to find a "sweet spot" where these are all the sa...
Tue, 10 Jun, 2025 at 8:08 PM
Hallo
- ich suche eine Möglichkeit einen Alarm via SMS zu versenden ( Anschluss via USB and den Rechner )
- i'm searching for an option to send out an Alarm via SMS ( connected with USB )
-> e.g. from Pässler-Server or Remotenode ...
Tue, 10 Jun, 2025 at 8:08 PM
Hello,
Is it possible to change the time range for the Volume Trigger ?
And not only use : hour, day, week, month.
we need an alarm if a volume (or a traffic average) is exceeded, for example over the last 3 hours.
Thanks in advance
Jér...
Tue, 10 Jun, 2025 at 8:08 PM
Hallo,
Is there a way to share a map design or template to a customer??
How can I design a map so that, when I share it, the customer can then link a device to this map and activate the map functionalities?
Thanks in Advance for yo...
Tue, 10 Jun, 2025 at 8:08 PM
Previous PRTG versions included the Windows Logged in Users sensor to monitor the number of users logged in to a Windows computer. This sensor type is marked as “deprecated” as of version 16.2.23 removed from PRTG with version 16.x.25.
Is...
Tue, 10 Jun, 2025 at 8:08 PM
Hi,
I would create an generell SQL Script with following query:
select sum(state + user_access + is_read_only + is_in_standby) as Status
from sys.databases
where name in ('master', 'tempdb', 'DB1', 'DB2')
...
Tue, 10 Jun, 2025 at 8:08 PM
Hi,
I have an issue with my powershell sensor
$found=Get-Process -ComputerName "srv-bi-01" | WHERE {$_.ProcessName -eq "svchost"}
Write-Host "<prtg>"
Write-Host "<result>"
"<c...
Tue, 10 Jun, 2025 at 8:08 PM
Hi,
I've come across an issue that has forced me to (hopefully temporarily) uninstall the software which I was using to do some SNMP monitoring.
Using Thunderbird for email, Oauth2 (which effectively loads a browser window to authe...
Tue, 10 Jun, 2025 at 8:08 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to be able to create custom alerts/stat...
Tue, 10 Jun, 2025 at 8:08 PM
We are using PRTG Network Monitor and we need to collect NetFlow data for the subnet 10.4.1.0 and produce dashboards for visual representation. Specifically, granular view of bandwidth and network traffic to be presented.
Can you guide us...
Tue, 10 Jun, 2025 at 8:08 PM
Hi Paessler support, I am not able to add RMON sensor on CISCO device to PRTG. Status is under RMON Specific showing "No Ports available" even though I have RMON configured on my CISCO device. Hope Paessler can help me, Thanks!
...
Tue, 10 Jun, 2025 at 8:08 PM
What are the default limits for each sensor? e.g. CPU, Memory, disk?
Article Comments
Hello,
We don't have a list of our defaults for our sensors, but if you create a new sensor it will populate with the default values for...
Tue, 10 Jun, 2025 at 8:08 PM
All settings are correct, port number , credentials etc but TLS/SSL/Implicite encryption gives and error -
Failed to establish secure connection [Step 0] Socket Error # 10061 Connection refused.
Article Comments
Hi there,
Do ...
Tue, 10 Jun, 2025 at 8:08 PM
i want to use the rest API but i need to active the Access-Control-Allow-Origin someone have an idea .
thanks
Article Comments
Hello,
Thanks for contacting us.
Can you provide more details about what you would like to acco...
Tue, 10 Jun, 2025 at 8:08 PM
Hallo liebe Community,
ich brauche leider Hilfe mit einem Veeam Script. Das lief mit unserem alten Backup Server problemlos.
Auf dem neuen bekomme ich nun o.g. Fehlermeldung.
Wenn ich das Script per Powershell ausführe, bekomme ich den...
Tue, 10 Jun, 2025 at 8:08 PM
Hi, i have got this problem with database sensor oracle table space timeout.
In the same device other tablespace sensor works correctly but two tablespace not run and respond as timeout.
I have verified from local probe with Dbeaver that ip...
Tue, 10 Jun, 2025 at 8:08 PM
Hi,
Added QoS (Quality of Service) One Way Sensor to my PRTG solution to source probe (local probe (127.0.0.1)) to a target probe (remote probe (10.4.6.5)). But getting ( Timeout. No packets received. (code: PE062)).
I have used the por...
Tue, 10 Jun, 2025 at 8:08 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want features and flexibility for MQTT senso...
Tue, 10 Jun, 2025 at 8:07 PM
the last value data is missing for some nodes in alarm templete.
Article Comments
Hello,
I would suggest that you open a support ticket for this issue. Also please include some screenshots of the notifications that you receive...
Tue, 10 Jun, 2025 at 8:07 PM
Hi,
I'm developing an application that periodically performs api calls to retrieve historic data from my prtg sensors. I'm using the 'api/historicdata.json' call, and I've noticed that performing a call with 'sdate&#...
Tue, 10 Jun, 2025 at 8:07 PM
We are looking to pull the "Show Version" information from the Cisco IOS devices. This would be an excellent feature because ALL engineers that use Cisco products need this information for compliance for their SMartnet maintenanc...
Tue, 10 Jun, 2025 at 8:07 PM
The 4 graphs on the device and sensor page.
Can we override the chart based on the particular sensor? Sometimes a sensor does not need 8 hours of info but that one needs 20 days. While other sensors need 2 hours and not 8 hours, or 16 ...
Tue, 10 Jun, 2025 at 8:07 PM
Hello,
I have a problem with a PRTG installation.
After a server reboot (where PRTG Core is installed), the PRTG Service don't start automatically and I need to start it manually.
In the Windows Service Console, both PRTG Core server ...
Tue, 10 Jun, 2025 at 8:07 PM
Hello,
My feature request for PRTG Network Monitor is to make the .evl files where traps and syslog messages are stored readable using a program like excel or notepad++ or some other sort of program.
Having readable access to the syslog...
Tue, 10 Jun, 2025 at 8:07 PM
hello everyone , i am trying customise notification using cpu and ping sensors but i didn't know how to do it , i tried to enter an every devices and do notification for cpu and ping but the result is lot of graphs , and i wanna receive...
Tue, 10 Jun, 2025 at 8:07 PM
How can i calculate the downtime of specific link of overall year .
Article Comments
Hello,
You can create Uptime/Downtime reports by using one of the Top 10 (or Top 100) uptime downtime templates. To get the uptime/downtime f...
Tue, 10 Jun, 2025 at 8:07 PM
I have uploaded Private Key, Signed Certificate per PRTG instruction but still getting SSL error.
Is there tech support number that I can contact to get some help?
Article Comments
Hello Jeff,
I understand that you are having ...
Tue, 10 Jun, 2025 at 8:07 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to able to use the "Credentials fo...
Tue, 10 Jun, 2025 at 8:07 PM
Hi There
I just wrote a script to check if a machine has a pending reboot.
https://github.com/TS-Steff/PRTG-GetComputerRebootStatus
'https://www.winvistatips.com/threads/how-can-i-write-a-script-to-read-a-remote-registry-using-diffe...
Tue, 10 Jun, 2025 at 8:07 PM
Hello,
I am attempting to read the ipNetToMediaTable (1.3.6.1.2.1.4.22) on a switch, but it looks like the sensor cannot read the entire table, since it contains a column for MAC addresses and IP addresses that are listed as a string.
...
Tue, 10 Jun, 2025 at 8:07 PM
I'm trying to embed a external website into a map but.
To do so I add a custom html code element on the map and in 'external link' I enter the URL of the page. But it doen't load.
Article Comments
Hello,
the &qu...
Tue, 10 Jun, 2025 at 8:07 PM
I have read other kb articles about how to change the data format as it appears in the web. However, the format in the email notifications are still in the mm/dd/yyyy hh:MM:SS AM/PM format. I would like to have dd/mm/yyyy hh:MM:SS AM/PM.
...
Tue, 10 Jun, 2025 at 8:07 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to be able to exclude ranges from the p...
Tue, 10 Jun, 2025 at 8:07 PM
Hello Guys,
i have a problem with the WMI Sensor on a PC.
If i test the WMI Connection via the WMI Tester on our PRTG Server it always shows "Error 80070005 Access denied".
If i run the WMI Tester from my own Notebook i can get...
Tue, 10 Jun, 2025 at 8:07 PM
In the Administration Tool i can install the "Service PRTG Application Server". Everything is working well. The services "Core Server" and "Probe" are installed an running.
What advantage we get when we install...
Tue, 10 Jun, 2025 at 8:07 PM
Hi
In an ideal world i'd like to not have to create sensors manually in PRTG as it is very error prone - it's easy to miss a new service...
Is it possible to configure PRTG through a templating tool, something like ansible?
so...
Tue, 10 Jun, 2025 at 8:07 PM
on cisco devices there is a command sho vpn-sessiondb that will identify the number of VPN connections established. This sensor is limited to 50 connections, however, we have up to 400 connections at a time. Can this be increased?
...
Tue, 10 Jun, 2025 at 8:07 PM
