kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi,
I'm trying di monitor the space left on disk on this device.
I've already add SSH SAN sensors, but they don't show me informations related to space, only health.
Is there any way to implement a script which can show me t...
Tue, 10 Jun, 2025 at 4:37 PM
Hello,
I have a question concerning autodiscovery.
When we perform an autodiscovery it kills the performance of our server while doing 10 autodiscoveries at the same moment.
Is there a way to limit simultaneous autodiscovery actions to a ...
Tue, 10 Jun, 2025 at 4:37 PM
Hello Dear PRTG Support
Have a question about PRTG Reporting.
I couldn't find a way to generate single CSV file with the list all sensors with their historic data for a given period
Also I couldn't upload example file of what I...
Tue, 10 Jun, 2025 at 4:36 PM
I just installed a prtg trial installation onto a 32bit Windows 10 installation (used for other purposes as well).
It's running so far and now I'm struggeling with the REST sensor configuration.
The REST query is working and deliv...
Tue, 10 Jun, 2025 at 4:36 PM
download other versions
Article Comments
Hi Joseph,
You can switch between the Stable and the Preview channel in the settings of the Desktop Client.
There is no separate download site I'm afraid.
Kind regards,
Felix S...
Tue, 10 Jun, 2025 at 4:36 PM
I need to call the traffic values (Traffic in, out, total, downtime, coverage) in an API call.
Historic data, as I will need this call to pull previous month data.
Article Comments
Hello Marina,
the historic-data API is docume...
Tue, 10 Jun, 2025 at 4:36 PM
Hello,
I have been searching to find a solution online, but couldn't find a similar topic.
In our mail notifications, for all the links to the PRTG server, the link is incorrect.
This goes for all the links in the mail body, here the ...
Tue, 10 Jun, 2025 at 4:36 PM
Hallo, ich muss eine MAP als Service View erstellen und würde gerne eine Datentabelle mit den nur aktiven Alarmen einblenden also ohne bereits bestätigte. In den vorhandenen Tabellen werden mir immer alle Alarme angezeigt. Gibt es eine Eins...
Tue, 10 Jun, 2025 at 4:36 PM
Hello,
I have a question about EXE/Script Advanced sensor and its XML structure to create sensor channels. I customaze my own .ovl file that works fine but is there a way how to specify via XML that channel use this .ovl file at Lookup?
I...
Tue, 10 Jun, 2025 at 4:36 PM
Hi all,
I have upgraded recently PRTG to version 23.2.83.
Since this upgrade, all my SSL Check sensors for ONLY my HPe systems are down.
Error is: Failed to shutdown the TLS connection.error:140E0197:SSL routines:SSL_shutdown:shutdown whi...
Tue, 10 Jun, 2025 at 4:36 PM
Hi, I would like to request a Teamviewer status sensor. It would be nice to poll information (as seen on their status website https://status.teamviewer.com/ ) about Uptime, Downtime and Partial Outage.
As far as I know there is no possibilt...
Tue, 10 Jun, 2025 at 4:36 PM
HTTPS sensor of an Access Point displays an alarm (Warning) constantly with description "Connection Closed Gracefully"
Running version: 23.1.82.2175+
Article Comments
It seems like that the connection is closed by th...
Tue, 10 Jun, 2025 at 4:36 PM
We have defined a own sensor which is based on a script with a XML output.
Still PRTG returns the value 0 all the time.
If we executed our Powerschell script on the server we receive the value 61
OUTPUT Script:
<prtg>
<result>...
Tue, 10 Jun, 2025 at 4:36 PM
After the last upgrade to PRTG Network Monitor 23.2.83.1760 x64 we get the following errors (but only to arba/hpe switches )
Failed to shutdown the TLS connection.error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Arti...
Tue, 10 Jun, 2025 at 4:36 PM
Is there a way to fine-tune the ipsla sensor for better detection of packet drops? If not, would appreciate some suggestions on how PRTG could do this. The QoS Reflector is not practical because the script has to be setup in multiple device...
Tue, 10 Jun, 2025 at 4:36 PM
I want to try Node Red to monitor a PLC. I've installed a remote probe on a PC on the PLC network.
Do I need to install Node Red on the main PRTG PC, on the remote probe PC, or both?
Article Comments
Hello,
Node Red does n...
Tue, 10 Jun, 2025 at 4:36 PM
how to monitor to get MTTF and MTTR values ??using the prtg networking application
Article Comments
Hello,
This would depend on what exact values you would want to get. You could use a Ping sensor to monitor the reachability o...
Tue, 10 Jun, 2025 at 4:36 PM
how do I extract the database in my PRTG
Article Comments
Hello,
you can extract data per sensor using the API.
Jun, 2023 - Permalink
Tue, 10 Jun, 2025 at 4:36 PM
We need to generate an availability report ONLY for the working hours.
Now, our working hours are a bit tricky, from 0700-2200 on week days, and 0800-1200 on saturdays. How can I do it?
Article Comments
Hi there, thanks for you...
Tue, 10 Jun, 2025 at 4:36 PM
Hi, we have two graphs with very different scales (1st from 1 to 12 and the 2nd from 1.000 to 1.000.000).
How can we plot both values in one graph? Is there a way to set a second scale?
Best regards
Article Comments
Hi there...
Tue, 10 Jun, 2025 at 4:36 PM
Hello,
We've a new environment on Azure VMware and we would like to know if it's possible to monitor Azure VMware (specially the hosts) with PRTG, for example the datastore disk capacity, percentage CPU, Memory, ect.
I cannot find a...
Tue, 10 Jun, 2025 at 4:36 PM
We just for a license and upgraded to 23.2.84.1566+
I'm having issues getting the WMI Event Log sensor set up.
I continually get the error
"Could not create the WMI Event Log sensor on device <serverName>.
The meta-sc...
Tue, 10 Jun, 2025 at 4:36 PM
<!--Custom Map Objects: Alarms Latest-->
<div class="map_object map_table" id="<@itemid>" objectid="<@objectid>" subid="<@subid>" style="overflow:auto;<#mapobject t...
Tue, 10 Jun, 2025 at 4:36 PM
I want to get a bandwidth utilization report for the branch network which consists of 250 devices, right now I have used a top 100 list & a custom made top 1000 list which gives a combination of devices that I need to filter out to view...
Tue, 10 Jun, 2025 at 4:36 PM
Hi Team
I use windows 10 and prtg 17; my application is easily accessible from the outside.
I want to test the availability of my application from the outside using the http cloud sensor. But still get the error DNS could not be resolve...
Tue, 10 Jun, 2025 at 4:36 PM
I haven't setup the SMS gateway information yet but once I do I need to get messages to the mobile numbers of key asset owners on device specific alarms filtered from the entire list of triggers. How is this possible?
Article Co...
Tue, 10 Jun, 2025 at 4:36 PM
hi
my devices send their value with MQTT without JSON (like '15' in the payload). How can I monitor that value?
Mario
Article Comments
Hello,
as of now, the sensor parses only JSON output, not unformatted content. ...
Tue, 10 Jun, 2025 at 4:36 PM
I have a problem with Veeam B&R State Sensor, it's always down and has a red alarm, I've been trying to figure out the problem for a long time but without success. can someone give a suggestion.
The access has been denied. To ...
Tue, 10 Jun, 2025 at 4:36 PM
With PRTG 22.x.80, you migrated the Cloud v1 sensors. What do I need to know?
Article Comments
This article applies as of PRTG 22.x.80
Cloud v1 sensor migration
With PRTG 22.x.80, we discontinued the Cloud HTTP sensor and th...
Tue, 10 Jun, 2025 at 4:36 PM
When performing a custom sensor and attempting to display the value of a variable, it shows 0.
# Obtener el tamaño del archivo
$SizeArchivo = (Get-Item $ServerArchivo).Length
#mandar datos a PRTG
"<prtg>"
"<r...
Tue, 10 Jun, 2025 at 4:36 PM
The license activation wizard in UvExplorer offers "PRTG Discovery Agent Activation".
I have completed the form as follows:
Server URL: https://ULR.for.my.prtg.server
Username: a username with API access
PassHash: taken ...
Tue, 10 Jun, 2025 at 4:36 PM
Hi all,
I know, this has been already discussed - but I really cannot get it running even after reading everything I could find here.
I have "PSWindowsUpdate PowerShell Module" running on my servers, which is pretty handy to ma...
Tue, 10 Jun, 2025 at 4:36 PM
Unsere Copy Jobs (neues V12 Format) werden in PRTG alle mit "Never started" angezeigt.
Der Job wird zwar gefunden, aber im Log steht dann folgendes:
2023-06-12 14:30:21.060446 DEBG TId 7296 Result of Sensor 6720> Get Job S...
Tue, 10 Jun, 2025 at 4:36 PM
Once I have entered the access data (https://prtgserver/index.htm) , it takes a very long time to log in.
After about 60 seconds, the website (.../welcome.htm) ist displayed.
We use AD integrated accounts, without SSO.
PRTG Network Mon...
Tue, 10 Jun, 2025 at 4:36 PM
Hi
I have a problem with monitoring Windows Services via WMI using a non-administrator domain user.
I am currently using an admin user and everything works fine. Both CPU, Memory, Disk and Services sensors. Due to PCI-DSS compliance, I ne...
Tue, 10 Jun, 2025 at 4:36 PM
Hello,
When deploying a 'Fortigate Health Sensor: PSU' sensor from an autodiscovery Fortigate Health v0.8 on my FG80/FG100 Fortinet Device with 2 power supply unit installed, both sensors showing the 'Alarm' Channel correc...
Tue, 10 Jun, 2025 at 4:36 PM
I am trying to get sflow to poll from fortiswitch to PRTG. our switch is configured as follows:
set sflow-sampler enabled
set sflow-sample-rate 4
set sflow-counter-interval 60
collector IP is also set accordingly
Article Comme...
Tue, 10 Jun, 2025 at 4:36 PM
I want to create a dashboard of alarms either with the maps feature or the alarm tab itself which represents branch links that are down and isolations, core switches, core routers, core security devices, core major uplinks i.e. It should be...
Tue, 10 Jun, 2025 at 4:36 PM
Warning caused by lookup value 'No' in channel 'Root Authority Trusted' — Warning caused by lookup value 'Unable to check revocation status' in channel 'Revoked' (OK. Certificate Common Name: ESX-xy-.company....
Tue, 10 Jun, 2025 at 4:36 PM
I am using the Enterprise Console of PRTG and it feels rather sluggish. What can I do?
Article Comments
Important notice: The Enterprise Console (EC) is unsupported and deprecated as of PRTG 19.4.53. As of PRTG 19.4.54, the EC...
Tue, 10 Jun, 2025 at 4:36 PM
Are there any effects on the PRTG Enterprise Console when running large PRTG installations with lots of sensors? Will I experience lags, hangs, or other issues when surpassing a certain amount of devices, sensors, probes, and servers or doe...
Tue, 10 Jun, 2025 at 4:36 PM
I recently installed PRTG’s Enterprise Console on my Windows machine but the EC does not start. After opening it from the Windows menu, a window pops up for a very short time and then the process stops; the window then disappears.
What co...
Tue, 10 Jun, 2025 at 4:35 PM
Is PRTG affected by CVE-2022-22963 or CVE-2022-22965. If so, is there any mitigation possible?
Article Comments
In response to the vulnerabilities in the Spring Framework (tagged as SpringShell, CVE-2022-22965, CVE-2022-22963) w...
Tue, 10 Jun, 2025 at 4:35 PM
After updating my PRTG installation from version 19.4.53 to version 19.4.54, the Enterprise Console does not automatically connect to the PRTG core server anymore. When I open the Enterprise Console, I get the error message
Server runs in...
Tue, 10 Jun, 2025 at 4:35 PM
I need assistance with the Enterprise Console. Where do I find solutions for issues with the Enterprise Console?
Article Comments
This article applies as of PRTG Network Monitor 19
Solutions to Common Problems with the Enterpr...
Tue, 10 Jun, 2025 at 4:35 PM
My cloud sensors are now returning an error and redirecting me to this article. What happened?
Article Comments
This article applies as of PRTG 23
A few years ago, in order to modernize the technologies that were being used on...
Tue, 10 Jun, 2025 at 4:35 PM
when I run a report it shows up with this message
Error C3: Include File Not Found "includes\reportfooter.htm
Article Comments
Could you please provide us more information? Does this error message occur on a single report o...
Tue, 10 Jun, 2025 at 4:35 PM
Hi,
I have discovered another issue id like to share with you regarding the PRTG Desktop software.
Windows 10 Enterprise 1803
When the desktop app is open and minimized to the system tray - when my machine locks itself and/or wakes up...
Tue, 10 Jun, 2025 at 4:35 PM
The auto update to 23.1.82.2074 has broken my MSMQ Sensors. I have tried to change the Device to use FQDN but this makes not difference. The credentials were working before the encryption change to the sensor as part of the update.
...
Tue, 10 Jun, 2025 at 4:35 PM
Microsoft 365 has been planning to eliminate basic authentication in its email services for a few years now, and they are currently on track for that to occur in October of this year.
Here's their most recently blog post on the matte...
Tue, 10 Jun, 2025 at 4:35 PM
I have several exexml factory sensors and I have assigned Mutexes (PS1, PS2, ...) in order to distribute the calculations over time. Now some scripts run into timeout and consume in sum more time than one of the Mutexes (here "PS3"...
Tue, 10 Jun, 2025 at 4:35 PM
Hi,
We just added CBS350-48P-4G to our network and were trying to get sFlows to show up in PRTG, for some reason the sflow sensor in PRTG reports no data being received, however running Wireshark on the PRGT server
shows flows being rece...
Tue, 10 Jun, 2025 at 4:35 PM
What is the status of CVE-2023-31448, CVE-2023-31449, CVE-2023-31450, CVE-2023-31452, CVE-2023-32781, and CVE-2023-32782? Do I need to do anything?
Article Comments
This applies as of PRTG 23.2.86
Summary
As of PRTG 23.2.86,...
Tue, 10 Jun, 2025 at 4:35 PM
Is PRTG support HTTP 2.0 for http sensors ?
Article Comments
Hello,
Thank you for the KB-Post. I'm very much afraid in the moment, there are no plans for the HTTP Sensors to support HTTP 2.0.
Best regards.
Jun, 2018 -...
Tue, 10 Jun, 2025 at 4:35 PM
Hi folks
I'm running PRTG ver 21.1 on a Windows platform at the moment.
I'm trying to retrieve syslog messages from earlier in the year on a specific syslog sensor
and I'm finding that PRTG seems to really be struggling to pul...
Tue, 10 Jun, 2025 at 4:35 PM
Hello,
Is there a way to report on Top Talkers from a sFlow sensor other then the Top Talkers section in the web page itself? I want to be able to have a weekly or monthly PDF report on bandwidth usage for each IP address.
I searched th...
Tue, 10 Jun, 2025 at 4:35 PM
Hello,
I would like to ask how to setup effectively prtg sensor for regular check in DB.
e.g. we've got regular daily check in the evening if we've got all data. The output is number of rows (right value is OK otherwise some of th...
Tue, 10 Jun, 2025 at 4:35 PM
Hi Support
Our licence is for 1000 sensors. We have total of approx 2600 sensors but 1800 of them are in paused state. So far we've always been using less than 1000 active sensors (824 as of current). However, since about 2 days ago t...
Tue, 10 Jun, 2025 at 4:35 PM
hi there,
is it possible to define limits based on gradient?
it could be possible with factory sensor, but it has no gradient function?
thank you.
kind regards,
chris
Article Comments
Hello,
Can you explain more in det...
Tue, 10 Jun, 2025 at 4:35 PM
We use a script to check if Altaro Backup Works:
For this example we set the variables fix with paramters of the servers
# Altaro Backup Monitoring
#-------------------
# Description: Modified script by Robert
# Original script: (c) 201...
Tue, 10 Jun, 2025 at 4:35 PM
I need to turn off the web help pages as they are available on the web site to non logged in users and this is compromising our PCI penertration testing
Article Comments
Hello there,
Thank you for using PRTG.
Sorry for this ...
Tue, 10 Jun, 2025 at 4:35 PM
Hi
I'm a bit stuck constructing a specific api call and need some help.
I need at least the following data: Percent used/free, Bytes used or free, for all channels of a "WMI Free Disk Space" sensor for a specific date. T...
Tue, 10 Jun, 2025 at 4:35 PM
Sometime around April 1, my Cisco Meraki Network Health (BETA) sensor stopped working and returns the following error:
"The sensor could not get a response from the server. 0 (). schannel: next InitializeSecurityContext failed: SEC_E...
Tue, 10 Jun, 2025 at 4:35 PM
I need to move all the objects in my map to create space for changed layout. Not easy to do one by one when you have very complex design. s there a way to do this ?
Thanx all
Article Comments
Hi,
this feature is planned to b...
Tue, 10 Jun, 2025 at 4:35 PM
I have 2 devices that have been running wmi Windows Event Log sensors for years. They decided to stop. I am unable to add new wmi event log sensors and gets stuck at the preparing sensor settings... page. I AM able to install other WMI s...
Tue, 10 Jun, 2025 at 4:35 PM
Microsoft Update KB5004442 changes the existing authentication rules and I'm having trouble with my WMI sensors. What steps should I take to make the WMI sensors work again?
Article Comments
This article applies as of PRTG 2...
Tue, 10 Jun, 2025 at 4:35 PM
Does anyone know or had problems with enabling the MS ASR rule "Block persistence through WMI event subscription" and PRTG monitoring through WMI.
Article Comments
Hello,
Thanks for contacting us.
Can you please desc...
Tue, 10 Jun, 2025 at 4:35 PM
Hello again.
I need to control some multicast queues to know when to stop retransmitting.
I have not found any appropriate oid either in a server NIC or in switch / router interface.
Any help is welcome.
Greetings.
Article Comment...
Tue, 10 Jun, 2025 at 4:35 PM
Hello,
I've added a Huawei S5720 switch to PRTG.
I want to make a group with the amount of connected ports.
As soon as the amount of connected ports changes in this group I want to receive a message about this.
How can I set this up...
Tue, 10 Jun, 2025 at 4:35 PM
Currently when I get warnings from Syslog sensor, it says stuff like (in German, but English version is proably similar):
< 0,01 #/Sek. (Warnungen) liegt über dem Grenzwert für Warnungen von < 0,01 #/Sek. in Warnungen — < 0,01 #/...
Tue, 10 Jun, 2025 at 4:35 PM
In my log in the main menu under Logs | System Events | Status Messages, I can see these three messages:
9/26/2011 9:20:59 AM
Starting Core Server: PRTG Network Monitor 9.1.0.1548 PRTG Network Monitor 500
9/26/2011 9:22:01 AM
Log...
Tue, 10 Jun, 2025 at 4:35 PM
I'm having an issue with the SSH Disk Free sensor not showing all partitions. Two of the data drives will only show up in df if the command is run with sudo - I have verified that the PRTG service account has sufficient permissions to ...
Tue, 10 Jun, 2025 at 4:35 PM
Hello, I'm trying to collect data from our Fronius photovoltaic inverters
The appliance give the data below calling this url :http://ipadress/solar_api/v1/GetInverterRealtimeData.cgi
I'm trying with restapi V2, but the output seem...
Tue, 10 Jun, 2025 at 4:35 PM
I tried searching using tags to include all our EPR servers (tag name is Meditech). However, although every server is tagged, the search came up with nothing.
I suspect this is because it list them as Objects, not Computers but I can'...
Tue, 10 Jun, 2025 at 4:35 PM
I've been reading about creating alerts and libraries, and I have not found a way to make a notification template that will do the following:
I want to make a notification template that will send notifications when ALL ping sensors (t...
Tue, 10 Jun, 2025 at 4:35 PM
Hello everyone,
we are using Zammad and PRTG. I would pretty much like to create a sensor that uses the Zammad API to read out the number of open tickets on an hourly basis.
I googled alot and tried alot but all I can find is that peopl...
Tue, 10 Jun, 2025 at 4:35 PM
Hello!
Can we use PRTG in a close network where PRTG will be completely offline from the start? As far as i understand we can activate it by an email, but will it require further reactivation?
Article Comments
Hello,
Yes you...
Tue, 10 Jun, 2025 at 4:35 PM
Hi,
I want to monitor the expiration of the Computer Certificate on our NPS Server.
I installed the WinCertExpiration.exe Sensor.
When I execute it from the command line with the -l parameter it says:
'No certificates found, make sure t...
Tue, 10 Jun, 2025 at 4:35 PM
Hello,
A quick question about the API. What are your recommendations for polling data from the API?
I would like to know how many times and how quickly I can request data from the PRTG API before it starts impacting performance. Also impo...
Tue, 10 Jun, 2025 at 4:35 PM
we are trying to generate our PRTG server DH key exchange from 1024 to 2048, but error appear after generating the key. Here is the error message
PS C:\Program Files (x86)\PRTG Network Monitor\cert> ..\openssl.exe dhparam -out dh.pem -...
Tue, 10 Jun, 2025 at 4:35 PM
hallo,
ich suche eine Lösung für mein PRTG jeden Tag booten, in PRTG selber gibt Möglichkeit entweder einmal pro Woche oder im Monat.
Danke
Souliman
Article Comments
Hallo Souliman,
In PRTG selbst gibt es in der Tat nur die...
Tue, 10 Jun, 2025 at 4:35 PM
We already export a list of devices via API in .csv format, We using notification triggers to invoke text to speech call that reads the comments field to notify the details.
Is there a way to export this list also with comments in the dev...
Tue, 10 Jun, 2025 at 4:34 PM
Hi all,
since some time I can observe that several sensors on different devices in our network are measured with response times of almost exactly 3000ms (varies up to max. 3030ms) on different TCP ports.
This makes these sensor states...
Tue, 10 Jun, 2025 at 4:34 PM
PRTG doesnot Send Summary Notification everyday, How to set up notifications to get the Summary Summary Notification every Morning.
Article Comments
Hello,
Could you advise more on what kind of summarization you want to rece...
Tue, 10 Jun, 2025 at 4:34 PM
How can I run the multi-platform probe and NATS server used by it with Docker? This article applies as of PRTG 24 and multi-platform probe 3.0.0 Running the multi-platform probe in a docker container The multi-platform probe is currently av...
Tue, 10 Jun, 2025 at 4:34 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to be able to add string values into th...
Tue, 10 Jun, 2025 at 4:34 PM
Hi,
at the Moment iam testing the Acronis Backup XML/EXE Sensor (ci-addon-paessler.exe)
The Manual can be found here: https://dl.acronis.com/u/pdf/AcronisPRTGPlugin_userguide_en-US.pdf
The Problem ist that the Sensors Show Green with &q...
Tue, 10 Jun, 2025 at 4:34 PM
Hi there
All my remote probes have the problem that their "Write Latency Max" channel on their "WMI Disk Health" (PhysicalDisk0, 0) sensor goes up after a few days (up to 10,000 to 50,000 milliseconds) and stays the sam...
Tue, 10 Jun, 2025 at 4:34 PM
What I am trying to do is take the average of the uptime/downtime of all my ping sensors. e.g. Let's say there are three ping sensors and in a given week sensor 1 is up 100%, 2 is 98%, 3 is 99%. The average would be 99%. Is there a way ...
Tue, 10 Jun, 2025 at 4:34 PM
We use auto-scaling in Amazon (AWS) to scale-out new machines (or scale back) depending on CPU load. The machines that auto-scale out receive a known IP address from a pool of IPs. So I know all potential IPs. There is always 1 server runni...
Tue, 10 Jun, 2025 at 4:34 PM
Hi,
Immediately after I applied the last update (23.2.84.1566) my iOS prtg app starts freezing when I need to scroll down a page with about 40 groups. Therefore, I can’t see any device or sensor nested inside this page.
This freezing b...
Tue, 10 Jun, 2025 at 4:34 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
Currently there is no out-of-the-box support for Let's enc...
Tue, 10 Jun, 2025 at 4:34 PM
We're using SNMP v2c, so I assume any counters we've created recently are 64 bit. But we are monitoring Palo Alto firewalls (PANOS 10.1.10), and their snmpd service is crashing intermittantly. Their tech support says they think it...
Tue, 10 Jun, 2025 at 4:34 PM
Hello,
how can i disable CipherSuite TLS_RSA_WITH_3DES_EDE_CBC_SHA at prtgappserver port 8443?
I disabled all weak ciphersuites on the server and that worked for PRTG server on port 443 and other ports. Only for prtgappserver on 8443 this...
Tue, 10 Jun, 2025 at 4:34 PM
How would I go about scanning an IP scope to see if an ip comes online? I have a special IP scope for consultants and want to know when they are online, and for how long. Is that possible?
Article Comments
Hey Phillip,
This is...
Tue, 10 Jun, 2025 at 4:34 PM
Hi
I am trying to get Netflow from a Cisco WLC. But nothing is happening!
Wireshark shows no CFLOW protocol from the WLC, but it shows other types like TCP and TLS (the laptop is connected by wifi)
The WLC is sending packets:
(Cisco Contr...
Tue, 10 Jun, 2025 at 4:34 PM
Hi,
I have an AD group where the members have changed. PRTG does add the new ones, upon login. But the ones that have been removed, and placed in a different AD group, those stay in PRTG in the initial group. They do not either get added ...
Tue, 10 Jun, 2025 at 4:34 PM
Hi,
I have this cURL command
curl --globoff -H "authorization:5v5wxxxxxxxxxxxxxxxxxxfO5Pvto" -i https://xxxxxxxxx.xxxxxxx.com/api/v1/getLastValue/19/3960ZYVGID8F/?items=[2000150227,2000150150]
I need to send --globoff parameter ...
Tue, 10 Jun, 2025 at 4:34 PM
I am running a two node cluster and we are getting notifications for Down ended (now: Down Partial) status. Can we only trigger when status is Up (Up on both cluster members) only?
Article Comments
Unfortunately this isn't...
Tue, 10 Jun, 2025 at 4:34 PM
Hello,
we want to change the domian on the PRTG Core server.
What impact will this have on the system (databases)?
The migration of the AD is successfully tested. Now we want to change the domain on the server.
Thank you and best reg...
Tue, 10 Jun, 2025 at 4:34 PM
