kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hello guys,
Thanks in advance for your help.
I'm working on the configuration of PRTG and i'm blocked with the traffic monitoring.
I'm using SPAN sensor with a mirroring port on the main switches. I can grab all the traff...
Tue, 10 Jun, 2025 at 10:49 PM
in my file i have column protocol and a have values: 1, 6, 17, 50, 97 ... what that mean? where i can check what type of protocol is it? This is a NetFlow v5 sensor.
Article Comments
'Protocol' shows the IP protocol valu...
Tue, 10 Jun, 2025 at 10:49 PM
I'm encountering a situation where the QoS round-trip sensor is detecting packets out of order. If I setup 2 sensors using the one-way QoS sensor they are NOT detecting any packets out of order.
We are not seeing any issues with call ...
Tue, 10 Jun, 2025 at 10:49 PM
After updating the PTRG system to version "PRTG Network Monitor 15.2.16.2230 x64" there is one probe that does not upgrade, all the others(23) did upgrade without any problems.
When I login to the server where the old probe is r...
Tue, 10 Jun, 2025 at 10:49 PM
Trying to integrate a basic Javascript inside a Custom HTML Map Object and with all the searching I could not find any example of this. In my file I have this:
<!--Custom HTML: GetClicky-->
<div class="map_object map_icon ...
Tue, 10 Jun, 2025 at 10:49 PM
I'm getting an alarm from a NetFlow sensor that says "1 hour interval average of 776 kbit/s (otherUDP) us unusually high for this hour of the week."
First, this message popped up several hours ago and show no sign of going a...
Tue, 10 Jun, 2025 at 10:49 PM
We have more then 90 Departments around the world.
All Departments have IT hardware which is monitored by PRTG.
Location is set on every device.
We also use tags like Continent, Country, City (as example: Europe. Germany, Berlin).
Now i ...
Tue, 10 Jun, 2025 at 10:49 PM
Why are there so few channels built into the netflow sensor? This results in much of the traffic being cataloged as other, and makes it hard to find out bandwidth utilization. Has anyone made a more complete channel definition list they can...
Tue, 10 Jun, 2025 at 10:49 PM
Hello,
I'm trying to add custom OID's but suddenly some of them are not providing information.
The OID is : 1.3.6.1.4.1.2011.2.63.2.4.1.1.2 (Type :Delta "unsigned)
When i'm testing it via SNMP Tester by Custom OID I...
Tue, 10 Jun, 2025 at 10:49 PM
I'm having issues running discovery on remote computer. No sensors are created and I don't see any errors etc. I verified that WMI works fine. Where do I look for details why discovery fails?
Article Comments
Hi artistic...
Tue, 10 Jun, 2025 at 10:49 PM
From the portname template I would like to setup automatic sensor naming using the following template:
[hostname] - [ifdescr] ([port])
Is this possible at all?
Article Comments
Hello,
thank you very much for your KB-Post. I&...
Tue, 10 Jun, 2025 at 10:49 PM
I have an appliance which is providing a string like this for an OID :
FAN 1 : 10800 RPM
How can I use a sensor to graph this value (only the number) ?
I tried with SNMP Custom but message says :
'FAN 1: 10800 RPM' is not a ...
Tue, 10 Jun, 2025 at 10:49 PM
Hello,
i'm trying to identify a backup mail that is configured within the IMAP sensor.
But it always fails with there is no email that matches the filters.
Im searching in the body with following regex: ^.*\b("name_client)\b.*$
...
Tue, 10 Jun, 2025 at 10:49 PM
I have MPLS VPN , one of my router shows total traffic as 0kbit/s. Other routers for other remotes sites o,k . any idea on how to fix this
Article Comments
Hello,
Thank you very much for the KB Post. Which exact sensor type ar...
Tue, 10 Jun, 2025 at 10:49 PM
We would like to add a device and poll information from it like Name, Type, Serial, Location with SNMP but we do not want that information to be hold within a sensor. So is there a possible way to automate the process within PRTG to poll th...
Tue, 10 Jun, 2025 at 10:49 PM
Hi all,
I found a lot of threads about placing a weather icon in maps (or create a sensor to monitor it) but nothing worked well for me so I did one by myself.
Admin Note:
Requires an secondary web-server capable of processing php scr...
Tue, 10 Jun, 2025 at 10:49 PM
Hi KB friends!
I am running v15.3.19.4027
I have a Draytek 2925 router connected to a Netgear GS108tv2 smart switch and monitor bandwidth utilisation. The router uses 32bit counters, switch 64bit, both snmp v2
I have noticed that PRTG sho...
Tue, 10 Jun, 2025 at 10:49 PM
I'm trying to set a sensor up to monitor a external https site but all I get is the following error message,
Error establishing secure connection [TLS10-12] Socket Error # 10061 Connection refused. [TLS10] Socket Error # 10061 Connect...
Tue, 10 Jun, 2025 at 10:49 PM
Hello,
I have two hosts with ESXi 6.0 and 1Gbit network.
when i live migrate VM VMware Host Performance (SOAP) sensor show Network transmitted ~ 970000 kbit/s
but the SNMP Traffic 64bit sensor show Traffic Out ~ 460000 kbit/s.
A...
Tue, 10 Jun, 2025 at 10:49 PM
Hello,
We need to implement an alerting that is triggered by multiple sensors on multiple devices.
What is the best way to do this?
Best regards,
sam
Article Comments
The easiest way to set a trigger on sensors which are on ...
Tue, 10 Jun, 2025 at 10:49 PM
We're planning on rebuilding our PRTG cache as described in this article: KB:My PRTG has stopped graphing
We've got about 9500 sensors in this PRTG installation and we need this to be done within a night (0:00 AM to 7:00 AM). Ca...
Tue, 10 Jun, 2025 at 10:49 PM
Hello world,
I've added all my switches.
They all have the same configuration but wome of them show that all the sensors are up while they aren't in the reality.
Thanks in advance.
Regards,
Article Comments
He...
Tue, 10 Jun, 2025 at 10:49 PM
How can someone add a sensor to monitor disk I/O in Linux?
There are only 2 answers using WMI for Windows but nothing for Linux and this post here:
https://kb.paessler.com/knowledgebase/en/topic/36813-how-to-monitor-disk-latency-on-a-lin...
Tue, 10 Jun, 2025 at 10:49 PM
Starting with Version 12, we are getting the following errors on two of our servers. I've rebooted the servers (and PRTG servers) and it doesn't seem to help. One of the servers is a Windows 2008 box and the other is a Windows 200...
Tue, 10 Jun, 2025 at 10:49 PM
Can Paessler please consider adding a new notification type to allow PRTG to communicate to any another system using a REST API? This would be very useful for sending alerts and generating tickets in other systems. For an example of the l...
Tue, 10 Jun, 2025 at 10:49 PM
Hi, I am currently trialling PRTG for a requirement we have to monitor a clients site to site VPN link. I can successfully poll interfaces via SNMP and receive stats for the physical interfaces. The PRTG software detects a virtual interface...
Tue, 10 Jun, 2025 at 10:49 PM
Hi
I was wondering if it's possible to use PRTG to create an overall availability figure for the systems over the last month?
I'm guessing there will be business logic that needs to be defined, for instance 1 DNS server failure is...
Tue, 10 Jun, 2025 at 10:49 PM
I am still trying the free version of PRTG to see if it fits my needs. The issue I am having is the sensors are constantly disconnecting and sending out alerts. Constantly on my servers PRTG reports:
"The host's WMI system is ret...
Tue, 10 Jun, 2025 at 10:49 PM
I've a sensor (HTTP XML/REST Value Sensor) returning a numeric value for the SPS state (0 ... 8).
The configuration dialog (german "Einstellungen") requires a "unit" to be entered although there is no real unit (V...
Tue, 10 Jun, 2025 at 10:49 PM
Our Prtg ticket system doesn't work properly: the web page return an Ajax Error PE1113: timeout.
Since we don't use Prtg ticket system, can I just delete ticket database ticketdata.dat and start over?
Thanks
Article Comments...
Tue, 10 Jun, 2025 at 10:49 PM
My API code looks as follows :
http://xxx.xxx.xxx.xxx/chart.png?graphid=-1&id=2047&width=380&height=200&graphstyling=showLegend%3D%271%27&sdate=2015-08-01-00-00-00&edate=2015-08-30-23-59-59&avg=86400&userna...
Tue, 10 Jun, 2025 at 10:49 PM
Hello, I tried the Oracle Tablespace BETA sensor but getting this error:
Parameter -isdif is missing or Parameter -channelnames is missing
Also using the "Sensor Oracle SQL" which is working fine with the sample SQL script.
...
Tue, 10 Jun, 2025 at 10:49 PM
Good Day,
We have recently implemented a Cisco VoIP platform which we have tried to add to PRTG for monitoring, without much success. We have this been able to add Drive space, CPU Memory and Ping to monitoring however this is not the tot...
Tue, 10 Jun, 2025 at 10:49 PM
Hello,
We are evaluating PRTG for our monitoring needs. We are a hosting company that will have approximately 1000 servers, and even though i have been able to setup basic stuff on PRTG, i have not been able to find all the information I ...
Tue, 10 Jun, 2025 at 10:49 PM
I just setup AD integration and now I can add AD group for email notification, when I test email notification via AD group and got the error "Error sending "Email": No recipient specified (Sensor/Source/ID: 2573/2715/1)."...
Tue, 10 Jun, 2025 at 10:49 PM
Hello,
We have just added the Exchange Database (Powershell) sensor to monitor our Exchange DB size, but it's reporting on Bytes.
Is there any way for to change/convert this value to GB instead?
Would be much easier for us to read...
Tue, 10 Jun, 2025 at 10:49 PM
We just installed a Cisco Wireless Controller 5508, and set it up to export Netflow v9.
From the Controller, we see the flows are exported correctly :
"Exporter-name: PRTG2
Total Flows Sent: 6300
Total Pkts Sent: 342
Total Pk...
Tue, 10 Jun, 2025 at 10:49 PM
I'm trying to use a powershell Script in a Notification, but I can't get it to work correctly with parameters, that are Placeholders.
The Script I'm trying to run just writes a file containing the parameters and some other inf...
Tue, 10 Jun, 2025 at 10:49 PM
There are several Linux machines running Ubuntu on the network. Can PRTG ingest XML responses with the example format below? I have been reading about the Mini Probes but find it confusing. Also, on the Python Script Advanced Sensor page it...
Tue, 10 Jun, 2025 at 10:49 PM
How do I monitor the websites having windows authentication? I tried both HTTP and HTTP advance sensor but am getting 401 Unauthorized error.. please help!
Article Comments
Dear Mayo,
The HTTP Advanced sensors supports three...
Tue, 10 Jun, 2025 at 10:48 PM
I'm trying to setup the PRTG server to be accessible from the internet.
My address is (all of them work when I am logged ON to the PRTG server) :
http://myservername/group.htm?id=0&tabid=1
http://myservername:80/group.htm?id=0&am...
Tue, 10 Jun, 2025 at 10:48 PM
I have NetFlow v5 sensor, I'd like to see all traffic regarding an IP address.
For example I have suspicion that the IP 1.2.3.4 is rogue so I want to check all communication with this IP = I want list of srcIP, dstIP, protocol, date&...
Tue, 10 Jun, 2025 at 10:48 PM
I would like to have a continuous pings on 3 servers that are having some disconnections.
Unfortunately the only possibility is every 30sec.
I tried to use multiple pings (30 pings) each 30 sec, but this is not exactly what I would like...
Tue, 10 Jun, 2025 at 10:48 PM
I want to check my vSphere 6.0 and all my ESX 6.0 servers with PRTG.
So i installed the sensor with "root" on my ESX hosts.
But when i check my esx host in my vSphere client, I see every second a PRTG message.
So my complete ...
Tue, 10 Jun, 2025 at 10:48 PM
The memory utilization on several servers with PRTG probes (local and remote probes) is getting too high. As the memory and system health sensors in my PRTG installation show, RAM is consumed to a minimum which results in sensor errors.
...
Tue, 10 Jun, 2025 at 10:48 PM
Hello PRTG Team.
First a huge thank for this powerful software.
My question is about Auto discovery and Sensors. When I launched for the first time PRTG software, I arrived on the Ajax Web page and I followed the guide. And before I was...
Tue, 10 Jun, 2025 at 10:48 PM
The page https://www.paessler.com/manuals/prtg/ssh_script_advanced_sensor shows an advanced sensor that was run by ssh. Is it possible to get the script code and any supporting code for that sensor?
Or is it possible to get the python cod...
Tue, 10 Jun, 2025 at 10:48 PM
Actually, we are monitoring ESXi servers for System Health (HP, Lenovo, Dell, etc) and when a disk fail in a raid for any reason, the raid is in degraded state and the status is shown as "warning". Is there a way I could set the ...
Tue, 10 Jun, 2025 at 10:48 PM
I have a group of `dhcp clients` which i would like to have visibility of, to allow me to check thier online presence, but can i remove the depenencies link to the parent group - so it doent flag the state of my whole montioring sytem as Re...
Tue, 10 Jun, 2025 at 10:48 PM
Hello Experts,
I am stuck in a weired problem that is I have two PRTG servers one is master and the other is slave(Failover ReadOnly)
I have add my servers in the master server via the Remote probe installing on them but now the problem ...
Tue, 10 Jun, 2025 at 10:48 PM
it was working fine but now it stopped completely. i get the below message:
10/19/2015 10:25:14 AM None Group Root Notification Info
Error sending "Email": Connection failed ("10.123.110.220")
i checked with our sys...
Tue, 10 Jun, 2025 at 10:48 PM
On the alert emails, there is a Last Result text that corresponds I think with the Primary Channel's last result. So if I have Server A and the sensor is Disk Free and is monitoring drives C: D: and E: and the D: drive gets low on spac...
Tue, 10 Jun, 2025 at 10:48 PM
I am new to PRTG. I have installed and work but don't understand why I have a line that Labeled "Other" which always appears at the top of my reports. All other lines are numbered. Is this the flow data from my Cisco router? S...
Tue, 10 Jun, 2025 at 10:48 PM
Dear Sir or Madam,
i would like to integrate a Sensor from the PRTG Browser into my own website, e.g. with using an iframe.
Is this generally possible?
I am looking forward to hearing from you.
Sincerely yours,
Marcel
Articl...
Tue, 10 Jun, 2025 at 10:48 PM
Dear Team,
I get the following error message on many systems (WMI worked before)
Beim Verbinden mit dem Remoteserver "xyz" ist folgender Fehler aufgetreten: Die Anforderung kann vom WS-Verwaltungsdienst nicht verarbeitet werde...
Tue, 10 Jun, 2025 at 10:48 PM
Hey guys, just wanted to mention a quick feature that would be usefull to add: Quick sensors red buttons at the bottom of a device. For example, I add a new Wifi device and want to add a custom snmp library for RSSI level and a bandwidth se...
Tue, 10 Jun, 2025 at 10:48 PM
I have a device that is doing dynamic updates. I'd like to monitor that device to ensure that updates are being downloaded and installed. If updates are not being downloaded and installed after a certain duration of time, (basically if ...
Tue, 10 Jun, 2025 at 10:48 PM
When I try and install the software I get this error that
Signature of C:\Program Files\PRTG Network Monitor.....\PRTG Server.exe is not valid!
Thanks
A
Article Comments
Hello,
Thank you for this KB Post. Please see the s...
Tue, 10 Jun, 2025 at 10:48 PM
I created my first sensor of type "HTTP XML/REST Wert" to get a simple JSON.
The only message I get is (took this from the debug textfile):
[Error]
Die Verbindung mit dem Remoteserver kann nicht hergestellt werden.
Exitcode custom...
Tue, 10 Jun, 2025 at 10:48 PM
I have created a custom lookup file but i am unable to load this because i cannot find the
button under systema Administration
Loading Lookups
You can (re)load the defined lookups in the custom folder by clicking the Load Lookups butt...
Tue, 10 Jun, 2025 at 10:48 PM
Is there a way to remove min/max kb from the 30 days graph?
Article Comments
Dear Rodger
This part of the graphing engine cannot be configured. The extreme values are always displayed.
The only way to get a graph without tho...
Tue, 10 Jun, 2025 at 10:48 PM
After I upgraded prtg to version 15.4.20.4377 some channels in the VMware Host Performance (SOAP) just display value 0 for example the power meter and the networks receivers. If i revert to to previous version using vmware snapshop the sens...
Tue, 10 Jun, 2025 at 10:48 PM
We are at the point in our PRTG installation where we're consuming approximately 10GB of log space every month in the "%programdata%\Paessler\PRTG Network Monitor\Monitoring Database" location. As you can imagine, we'd lik...
Tue, 10 Jun, 2025 at 10:48 PM
I want to create a availability report of our servers with a script out of the historical data.
Sometimes we have to set the state of a sensor to paused.
The problem is that the sensor writes 0% coverage in the historical data while he i...
Tue, 10 Jun, 2025 at 10:48 PM
this is the error message
"Connection could not be established (800706BA: The RPC server is unavailable - Host: 172.17.13.3, User: administrator, Password: **, Domain: ntlmdomain:jphil) (code: PE015)"
Article Comments
...
Tue, 10 Jun, 2025 at 10:48 PM
We installed Trial version on a laptop running Windows 8.1. We are now ready to purchase software, but would like to move the existing install to a server box running Windows Server 2012. Is this possible?
Article Comments
Hi OS...
Tue, 10 Jun, 2025 at 10:48 PM
Does PRTG have the possibility to monitor with Netstream for Huawei equipment?
We are using PRTG version 15.4.19.4197
Article Comments
Hello,
Thank you for your KB Post. As there are no native Huawei Sensors available in PRT...
Tue, 10 Jun, 2025 at 10:48 PM
Hi Paessler Support
Ich habe am Wochenende unsere Server von "HP esxi 5.5 Update 1" auf "ESXI 5.5 Update 3" upgedatet.
Bei einem Server motzt der esx hardware status (SOAP) sensor (esxserverhosthealthsensor) auf den ...
Tue, 10 Jun, 2025 at 10:48 PM
How do Probes work after they are added to the Deny GIDs list? Will the PRTG Probe Service continue to dial home indefinitely, or does the Probe Service stop connecting once it is added?
Article Comments
Hello,
we appreciate ...
Tue, 10 Jun, 2025 at 10:48 PM
Hi, i have a powershell script that returns two values "OK!" and "Failure". How can i now use it in the PRTG EXE/script sensor?
$dir = "myDirectory"
$filter = "*.log"
$searchstring = "Status&qu...
Tue, 10 Jun, 2025 at 10:48 PM
Hi Support,
I just imported my custom MIB successfully and found oidlib files from D:\PRTG Network Monitor\snmplibs, but when I add an SNMP sensors I cannot found it, what should I do next?
Thanks!
Article Comments
Dear smal...
Tue, 10 Jun, 2025 at 10:48 PM
I'm looking for a way to distribute OID Libraries for specific SNMP-enabled devices to installations at several remote sites that are not interconnected.
Instead of having all of the sensors show up, I'd like to modify the MIB or ...
Tue, 10 Jun, 2025 at 10:48 PM
We have a couple Dell Poweredge servers running Xen 6.0.2. We had quarterly maintenance in which both physical machines got rebooted. After the reboot PRTG (latest version) starting showing this error for one of them;
Xen VM Controll Do...
Tue, 10 Jun, 2025 at 10:48 PM
Hi Paessler
We just tried out the miniprobe on a raspberry pi 2. I just wanted to tell you that the setup does not store the PRTG Servers address (IP or DNS name) in the probe.conf. You have to manually add it after the initial setup. We ...
Tue, 10 Jun, 2025 at 10:48 PM
I installed PRTG on a server but decided to move it to a dedicated box so I could update/restart whenever I needed to.
I'm trying to remove it from the initial server (which happens to be my file server). It totally freezes the server...
Tue, 10 Jun, 2025 at 10:48 PM
Is it possible to send a SOAP request to a web service using PRTG. I have tried packaging up the SOAP request in the HTTPS POST of the advanced HTTP sensor, but form validation means I can't use this.
Example uses might be response ti...
Tue, 10 Jun, 2025 at 10:48 PM
Hi
I've just installed a trial on PRTG, initial experience was seemless, that is until I went to the Infrastructure Dashboard view.
The screen is impossible to read, I've got a laptop with a 1080p screen, actual dashboard and ta...
Tue, 10 Jun, 2025 at 10:48 PM
Getting Wrong DataTree verion. Needd: 7 - found:9 when we try to start the core server. PRTG got uninstalled from the server accidentally. We reinstalled and get this error. We are not absolutely sure we reinstalled the same version tha...
Tue, 10 Jun, 2025 at 10:48 PM
Hi experts,
I would like to know, if it's possible, a way to atach a file (for example a config file) of a device.
For each device of our network I want have all the sensors and the respect config file.
I know I can connect by htt...
Tue, 10 Jun, 2025 at 10:48 PM
Is there an easy way to just add a group from the devices > overview tab to a map configuration.
I have the created a group and added the sensors and servers I want and the view looks great but trying to configure a map to look the sam...
Tue, 10 Jun, 2025 at 10:48 PM
Hello experts,
We are experiencing a weird problem that we have remote probes installed on our devices that connects to our prtg server
additionally we have configured "sensor-factory" sensor with their channel ids in them just ...
Tue, 10 Jun, 2025 at 10:47 PM
Hi Paessler
I have a strange behavior. I just created a new custom script and copied it into the "custom sensors\EXE" path. Then i wanted to create custom exe Sensor with it. But none of my custom scripts appear anymore, only th...
Tue, 10 Jun, 2025 at 10:47 PM
Hallo zusammen,
ich habe eine Frage bzgl. Alamierung....
Ich habe eine Gruppe mit Citrix Servern - diese sind provisioniert und booten fast jede zweite Nacht... Nun habe ich dort nach dem Boot oft folgenden Fehler:
Letzte Meldung:
Ver...
Tue, 10 Jun, 2025 at 10:47 PM
Hi,
I trying to install SNMP custom sensor to poll one of the switch's interface status.
However, I keep getting message like "No response (check firewall, routing and snmp setting - error # 2003)".
I tried using Paessler ...
Tue, 10 Jun, 2025 at 10:47 PM
If i try to change the device tree view option to the sunburst view after refreshing it goes back to the list view. Is there any chance this can be set permanently to the sunburst view for a read-only user.
Article Comments
This...
Tue, 10 Jun, 2025 at 10:47 PM
Hallo zusammen,
ich habe eine Frage bzgl. Alamierung....
Ich habe eine Gruppe mit Citrix Servern - diese sind provisioniert und booten fast jede zweite Nacht... Nun habe ich dort nach dem Boot oft folgenden Fehler:
Letzte Meldung: ...
Tue, 10 Jun, 2025 at 10:47 PM
We have folder sensors that work well for a while and then will fail. They give error code "logon failure: no network provider accepted the given network path (1203) (code:PE029), or "cannot access folder: The filename or extensi...
Tue, 10 Jun, 2025 at 10:47 PM
Is it possible to get a list of paused sensors/devices sorted by date? I would need it like this:
Name | Device | Sensor | Date
Article Comments
Dear Marnix
The closest would be
/tablewithstyles.htm?id=0&content=sensor...
Tue, 10 Jun, 2025 at 10:47 PM
All of a sudden, my Google Analytics sensors stopped working showing:
The remote server returned an error: (404) Not Found.
What can I do to get this sensor working again?
Article Comments
Google has changed its authentica...
Tue, 10 Jun, 2025 at 10:47 PM
I'm trying to set up PRTG to use an existing Exchange server as an SMTP relay server for notifications. I've configured all the settings in Setup > System Administration > Notification Delivery, and when I set the SMTP Relay U...
Tue, 10 Jun, 2025 at 10:47 PM
hi,
I whant to monitor many server with custom sensor (specific applications). I would not install "big" remote probe on each server!
Mini probe would be the solution but i can not find it for Windows!
Article Comments
...
Tue, 10 Jun, 2025 at 10:47 PM
I'm receiving a warning for "windows defender up to date, on access scan running". The status, although, is green, but the sensor shows as yellow. Why is that so ? How can I change it so it shows as OK ?
Article Commen...
Tue, 10 Jun, 2025 at 10:47 PM
How do I setup an interface filter for sFlow on an HP 8212 Switch? The interface names are alphanumeric (eg 'A1', 'B13', etc.) not just numbers.
I tried using 'Interface[A1]' but I seem to be getting some quirky re...
Tue, 10 Jun, 2025 at 10:47 PM
I want to use this sensor to monitor multiple values from a table (but not all of them). When i configure the sensor with just one channel it works fine, but when i configure one with more than one channel i get the error " '' ...
Tue, 10 Jun, 2025 at 10:47 PM
Hi,
Having read through the KB regarding PRTG Android on BES. I assume that people are trying to install PRTG for Android on a Blackberry handset.
As you state this is not possible. But could it be done on an Android handset within the ...
Tue, 10 Jun, 2025 at 10:47 PM
I have my local probe that will not return to healthy state and already tried both updating the latest PRTG and the registry hack for NoMacScan with still no luck.
Can you let me know what is next other than a complete reinstall?
...
Tue, 10 Jun, 2025 at 10:47 PM
I would like to set some sensors up so they will only alarm after the sensor has been in a down state for a extended period of time. Is this possible, and if so how? I see that there is a threshold for notifications, but it appears to be ...
Tue, 10 Jun, 2025 at 10:47 PM
I'd like to know if there's a way to install the enterprise console from a command line silently. I need to package it to deploy for 30 IT guys in our company. Thanks
Article Comments
If you want to install this silently...
Tue, 10 Jun, 2025 at 10:47 PM
Hello
I want my ping-sensor to be dependent of another ping sensor and only show the down-status (and here's the difference to the dependency setting in PRTG) when the other sensor is also down. Otherwise it can be paused.
We have a...
Tue, 10 Jun, 2025 at 10:47 PM
Hi
I have a Powershelscript that monitor a SAN system.
A portion of the XML output, seen here .:
<result>
<channel>
Unfixed errors in the system
</channel>
<value>
2
</value>
<Down>
1
</Down>
<...
Tue, 10 Jun, 2025 at 10:47 PM
