kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Currently we are eating up our sensor count for paused sensors that we use for hardware specific templates that we copy from VIA automation. Would there be a way we could have a sensor status that is called "template" that doesn&...
Tue, 10 Jun, 2025 at 3:13 PM
Does PRTG have a sensor that allows it to monitor the remaining disk space?
I'm monitoring a few virtual machines and I'd like to see how much remaining free space each of them have so we can adjust it when its almost full. Thank ...
Tue, 10 Jun, 2025 at 3:13 PM
Hallo zusammen,
Ich betreibe eine PRTG Installation mit mehreren Remote Probes.
ich würde gerne in einer Map eine Datentabelle mit den Fehlersensoren aller, bis auf einer, Remote Probes erstellen.
Gibt es hier eine einfache Möglichkeit ...
Tue, 10 Jun, 2025 at 3:13 PM
My system often has performance issues.
Is there a way to determine the Windows process that causes the highest CPU load?
Article Comments
This article applies to PRTG Network Monitor 14 or later
Showing the Process with the...
Tue, 10 Jun, 2025 at 3:13 PM
Hi all!
I'm fairly new to PRTG and needed to implement a Sensor which checks if any files are in a folder.
If the sees more than 4 Files in the folder for more than 10 Minutes, it should trigger a E-Mail Notification.
I've as of n...
Tue, 10 Jun, 2025 at 3:13 PM
Hi,
I got an issue here where I don't find the reason for..
I have AD authentication active, Admins can login fine.
Now I want to put them in groups to get also notifications to them.
Unfortunately, there is no local account created f...
Tue, 10 Jun, 2025 at 3:13 PM
I am wondering how downtime is calculated from a sensor. I see the reporting as a Percentage of the time interval which the device was down. Does the sensor ping the device at an interval until it finds the device to be down, at which point...
Tue, 10 Jun, 2025 at 3:13 PM
Hello!
I cannot setup PRTG to send me an email alert if one of my power supplies in BIG IP goes down. Trigger is default (if down for 60 seconds, send email to group), I can see it in the PRTG log, but there is no email notification sent....
Tue, 10 Jun, 2025 at 3:13 PM
Wir verwenden unter anderem auch den Sensortyp VMware Hostserver Leistung (SOAP).
Dieser funktioniert auch problemlos, allerdings möchte ich nur einige ausgewählte Kanäle dieses Sensors einzeln in einer map darstellen.
Wie ist hierbei vorz...
Tue, 10 Jun, 2025 at 3:13 PM
I know I can monitor SSL certificates with a preconfigured sensor in PRTG.
But how can I monitor an active digital CA windows certificate on the machine running the PRTG probe?
Article Comments
This article applies to PRTG Ne...
Tue, 10 Jun, 2025 at 3:13 PM
Hi,
I'd like to build a sensor that behaves like a native sensor.
as an example, the win services sensor allows you to select from a dropdown list of services on the device the sensor is added to.
I dont want to use the custom senso...
Tue, 10 Jun, 2025 at 3:13 PM
Hello,
is there a possibility to create an own notification trigger for the selected favorite sensors in the menu sensors - favorites?
I would like to select favorites from any desired sensor within different devices. for example the most...
Tue, 10 Jun, 2025 at 3:13 PM
I'm searching for a method to monitor objects like printers in PRTG without them giving error messages.
Printers will sometimes be 'offline' which cause an error, but these error's are irrelevant.
Is there a method to ...
Tue, 10 Jun, 2025 at 3:13 PM
Hello,
I would like to know if it's possible to protect some sensors and/or devices from deletion based on TAGS or Libraries
i.E I want to avoid that other administrators delete a device or sensor used in a Report for example.
Thank ...
Tue, 10 Jun, 2025 at 3:13 PM
Hi Paessler, we are user of PRTG and currently monitor over 27000 objects across our estate and we are looking to make PRTG maps available through a native M365 app we are developing. I notice SSO isn't available yet, can I ask when thi...
Tue, 10 Jun, 2025 at 3:13 PM
Is there a way to add a column in the List of Sensors report template so it shows the "Message" text field of the sensors?
Article Comments
Hello,
Thank you for your post.
It is not possible to generate reports for...
Tue, 10 Jun, 2025 at 3:13 PM
Dear all
When using the PRTG hosted by Paessler ther is no possibilty to execute custom scripts for notifications. The "Execute HTTP Action" isn't capable to send JSON notifications. So how can I call a Rest APKI that requir...
Tue, 10 Jun, 2025 at 3:13 PM
Hi, when will there be a Microsoft SQL Server 2019 Sensor?
Article Comments
Hi there,
We have already issued a creation of a native WMI Microsoft SQL Server 2019, but it is still on our to do so far.
I also don't expect i...
Tue, 10 Jun, 2025 at 3:13 PM
Does PRTG have the ability to monitor a Nutanix environment?
Article Comments
Hi Jared,
Well, seemingly there are MIB files within the Nutanix SNMP Configuration section. You could import them using the MIB Importer and then u...
Tue, 10 Jun, 2025 at 3:13 PM
I am running a powershell script to grab tye users logged on to a device. This is output to a html file in form of a table with some formtatting. I copy this to the public directory on the core server. In the map i have a custom html object...
Tue, 10 Jun, 2025 at 3:12 PM
Hi
In my prtg, sometimes errors appear and disappear after a while.
These errors and warnings disappear after five minutes and reappear
Please advise
Article Comments
Hello Aref,
Would you please further elaborate what "e...
Tue, 10 Jun, 2025 at 3:12 PM
I have a TCW122B-WD device. i have downloaded their MIB files for the device and imported them into PRTG. however nothing is showing correctly. has anyone else used this device and had the same issues with PRTG ? if anyone can help that ...
Tue, 10 Jun, 2025 at 3:12 PM
I have a script that gets the status of services. Currently, sensor sets value of 0 (UP state) when service is running. How can I set the sensor to Down state if the service is stopped?
Article Comments
Hello there,
You can de...
Tue, 10 Jun, 2025 at 3:12 PM
Hi, I am trying to configure sensor to Mysql on default port with specific user id and password. But during discovery I am getting "unable to connect to any of the specified Mysql hosts".
Please help.
Article Comments
...
Tue, 10 Jun, 2025 at 3:12 PM
Hi,
We currently are trying to use the Veeam sensor recently out.
We did put it in a client office and it worked directly (had to install Veeam Manager first)
But then we tried somewhere else and we are stuck with an error :
"R...
Tue, 10 Jun, 2025 at 3:12 PM
Hi Anyone have a working sensor that can have info on Memory, CPU, and Temperature for HP FF 5700 Series (HPE FF 5700-32XGT-8XG-2QSFP+Switch)?
We have this switch that is stack also but i need to identify them individually.
Any proven worki...
Tue, 10 Jun, 2025 at 3:12 PM
I would like to check the availability and response time of a WSDL or SOAP service. How can I do this with PRTG?
Article Comments
? Note: The following content is deprecated. It is not allowed to enter XML in the Postdata field ...
Tue, 10 Jun, 2025 at 3:12 PM
Hello Paessler,
I have sensors that pulls serial number, ip address, model, firmware version, etc. from my network devices. How can I send all that data in notification email along with the device name and specific alert? I want not just ...
Tue, 10 Jun, 2025 at 3:12 PM
Hey everyone,
I'm pretty new to PRTG - but I am trying to set up some notifications to go to Microsoft Teams. I have the alert coming fine - but I would like to remove the [Scan Now] [Acknowledge Alarm] [Pause] [Pause for 60 minutes...
Tue, 10 Jun, 2025 at 3:12 PM
hi team,
I have a question for you, what protocol do you use to take the uptime sensor? what is the icmp / ping protocol? or other?
I have a problem for the uptime sensor which sometimes has holes like the bandwidth is not shared, if so I ...
Tue, 10 Jun, 2025 at 3:12 PM
When I use the generic rest template channelDiscovery I get a large amount of channels that are displaying values I am after correctly using the Query
/api.o.j/network%3Brxes%3Btx%3Bcpu%3Btemperature%3Blocation.remote
ie:
ChannelIDLa...
Tue, 10 Jun, 2025 at 3:12 PM
According to Case PAE695407 I would really appreciate if the RADIUS sensor can be complemented with a certificate lifetime check. RADIUS is often used in conjunction with wired or wireless authentication and Protected EAP (PEAP), and theref...
Tue, 10 Jun, 2025 at 3:12 PM
Hello,
Can someone guide me with process of backup and restore? existing OS is about to go EOL and I have setup new latest windows server. OS will change from 2008 to 2019.
What is the best way to backup entire database and restore?
I in...
Tue, 10 Jun, 2025 at 3:12 PM
I ran the PRTG Installer and finished it, but a npcap driver was not installed.
Is it mandatory to install the npcap during the PRTG installation?
Is the npcap only needed when using Packet Sniffer sensor?
Article Comments
H...
Tue, 10 Jun, 2025 at 3:12 PM
Is there a way to add market capitilzation sensors and stock tickers onto sensors and a dashboard? If so, where is the knowledge base guide for this?
Article Comments
This is may possible if you have the corresponding data sour...
Tue, 10 Jun, 2025 at 3:12 PM
I have tried to search but didn't see any reference to this. When I try to edit an existing object, the device name and IPv4 Address fields show correct for about 1 second then revert to Root and an odd IP address. It's like the b...
Tue, 10 Jun, 2025 at 3:12 PM
Hi there,
I am trying to display dynamic lat long on the geo maps.
I have a sensor that extracts the dynamic lat and long every minute (gps is on a boat):
ChannelIDLast Value
$["5"]latitude6-55.23403285432
$["6"]longi...
Tue, 10 Jun, 2025 at 3:12 PM
When I acknowledge a "down" sensor and add notes, it seems to reset and show up red again, in the Alarms screen after a while, cleared of the acknowledgement and notes. Is there a default reset time? version 8.2
Article Co...
Tue, 10 Jun, 2025 at 3:12 PM
Hello,
I would like to know if it's possible or not to use the SSL Certificate sensor to monitor root certificate and other like Exchange certificate ?
Article Comments
Hi Akla,
The sensor can only monitor HTTPS certifi...
Tue, 10 Jun, 2025 at 3:12 PM
We have a number of HTTP advanced sensors which under the Authentication settings section all use Windows NTLM authentication. These all use the same account which means every time the password is reset we have to go through each sensor and...
Tue, 10 Jun, 2025 at 3:12 PM
I have a REST custom sensor template as below. It triggers alert if the lookup is not successful. Is there a way I can reverse the condition, to make the sensor alert if the lookup value is equal to "Available"?
{
"prtg...
Tue, 10 Jun, 2025 at 3:12 PM
Hi all,
For each website we host, we have a SSL Certificate Sensor. Currently it scans every 12 hours, where the two most important pieces of information are:
- Compare and show down status if common name (CN)/alternative names (SAN) an...
Tue, 10 Jun, 2025 at 3:12 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to have a more secure method to pause a...
Tue, 10 Jun, 2025 at 3:12 PM
Hi
I have mad a custom lookup table with BitField based on an unsigned integer read with the modbus sensor.
Most of it work, or in fact, nearly everything works as planned and expected.
But the visual indication, the toggles, are showing ...
Tue, 10 Jun, 2025 at 3:12 PM
Do you support Juniper SRX J-Flow with PRTG?
Article Comments
As of PRTG version 8.2, there is a jFlow sensor type which supports jFlow V5, as well as a jFlow v5 (Custom) Sensor.
The J-flow export of Juniper devices can be se...
Tue, 10 Jun, 2025 at 3:12 PM
Hi all,
Setup PortState as Custom EXE/Script
Select PortState.exe
Entered the parameters:
-id=%sensorid -h=%host -p=34780 -pt=UDP
Once created, PRTG created 3 channels/status:
Channel IDLast Value
Downtime-4
Execution T...
Tue, 10 Jun, 2025 at 3:12 PM
We have 2 probes and would like to bring the devices of the 2 probes together in a group without having to double our sensors
Is it possible ?
Probe A
- vm1
- vm2
- FW1
Probe B
- vm3
- FW2
Article Comments
Hi Mike,
You can...
Tue, 10 Jun, 2025 at 3:12 PM
I've got devices within a group, in this case signifying the LAN of a given site. I also have a group for the WAN connection. Each device within the LAN group has its own ping sensors that act as the master for that device.
Currently,...
Tue, 10 Jun, 2025 at 3:12 PM
Hi Peassler,
it is possible to install PRTG on cloud where core probe on cloud and remote probe on remote site?
Article Comments
Dean,
Yes, this is entirely possible. In fact, we offer this as a service with our PRTG Hosted...
Tue, 10 Jun, 2025 at 3:12 PM
https://www.paessler.com/manuals/prtg/wmi_vital_system_data_v2_sensor
Can someone from PRTG elaborate on the line in this sensor manual that says
'You cannot add this sensor to the hosted probe of a PRTG Hosted Monitor instance. If yo...
Tue, 10 Jun, 2025 at 3:12 PM
I am not looking for inherited notifications. What I would like is a notification on a group that would sense when any of the devices/sensors in it are down and send an alert. It would also include a count telling us how many of the devices...
Tue, 10 Jun, 2025 at 3:12 PM
I run two amateur radio systems that provide 24/7 message server access to users via radio. I need a way to be notified when I lose my internet connection or if my computer shuts down for some reason. I tried using a service to monitor my I...
Tue, 10 Jun, 2025 at 3:12 PM
We are setting up a cloud PRTG, I'm trying to use AD for authentication to give admins different level of access to the platform and was wondering if there is a way to integrate cloud PRTG with on-prem AD or Azure AD.
Article Co...
Tue, 10 Jun, 2025 at 3:12 PM
Hello,
Whenever I edit a probe/group and edit notification settings, any field I change and saved it is automatically reverted which is very annoying. Lets say I edit a Group:
ABC Group > Notifications > Only use the triggers define...
Tue, 10 Jun, 2025 at 3:12 PM
Hi,
I'm lost! Did a lot of research and found many articles (mini probe, http/get, ssh, etc. idk) but I'm missing the bigger picture. I simply don't get it. Need someone to show me the direction.
What I want:
I want to send ...
Tue, 10 Jun, 2025 at 3:12 PM
How can i make a report to get every month showing everything critical disturbances on PRTG?
Article Comments
Hello,
At this time, we do not have a report that would generate this kind of data.
You can recommend this as a feat...
Tue, 10 Jun, 2025 at 3:12 PM
Hello,
We have a lot of extreme Networks Switches and want to monitor the values from the sfp modules.
I Receive values that are in the format of mW. But i’m really looking forward to get values in dBm.
For that i need the log(10)....
Tue, 10 Jun, 2025 at 3:12 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want when I clone a sensor using REST API, I...
Tue, 10 Jun, 2025 at 3:11 PM
Are there any plans to produce native sensors for polling the health status and other parameters of Huawei server platforms that run on iBMC?
Article Comments
Hello Denis,
Please, open a feature request by following the Kb art...
Tue, 10 Jun, 2025 at 3:11 PM
We have a number of alerts "Warning" for which we have created tickets.
How to identify a Warning to which we have associated a ticket?
is it possible to acknowledge receipt of the Warning?
Thanking you for your feedback
...
Tue, 10 Jun, 2025 at 3:11 PM
Hello dear community,
I am looking for a ready solution how to monitor my Citrix environment with PRTG.
Important for me is the performance of the individual Citrix servers, whether all VDAs are registered in Citrix Studio, whether server...
Tue, 10 Jun, 2025 at 3:11 PM
Dear,
We have multiple netgear stacks and monitoring for them in PRTG. Is there an option so we can devide these stacks in the seperate logical units (max 8 per stack) so we can use them on a visual switch map per unit instead as per stac...
Tue, 10 Jun, 2025 at 3:11 PM
Hi,
I just submitted a support case to Paessler for this, but thought I would post on here too.
I just attempted to install a remote probe (version 19.2.50.2842) on a fully patched Hyper-V server 2016 (OS Version 10.0.14393). The instal...
Tue, 10 Jun, 2025 at 3:11 PM
Hello,
We have a large numer (30+) of Oracle SQL v2 Beta sensors. Most of them perform very well. A few of the queries against the target database are quite complex and take a few seconds to return a result. It appears that if this is lon...
Tue, 10 Jun, 2025 at 3:11 PM
How to find what is the current log retention on a Windows Server 2019 ? We need to find what we can do to deliver Windows Event logs in the Windows Servers .
Please guide.
Article Comments
Hi there,
are you referring to the...
Tue, 10 Jun, 2025 at 3:11 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to make a report for all critical disrupt...
Tue, 10 Jun, 2025 at 3:11 PM
Hello, I am trying to send JSON curl post to url when some sensor have an alert.
I tried to add port check sensor and I added notification, I see that POST not accepting JSON format.
Is there any way to trigger json curl post when sensor a...
Tue, 10 Jun, 2025 at 3:11 PM
In order to monitor two domaincontrollers in a customers LAN, I added the LDAP(s) sensor for each server. Both sensors were configured exactly the same way. At the moment they are in an error state but the errormessages are different.
One...
Tue, 10 Jun, 2025 at 3:11 PM
When a device was added with auto-discovery, the dependency was automatically set to its own ping sensor.
However, in the case of manually adding a ping sensor, I can't select the ping sensor in dependency option.
Can't I select...
Tue, 10 Jun, 2025 at 3:11 PM
Hello, I have many clients to monitor and we're connected to their local network with a VPN. I know that we can monitor the VPN tunnel, but i would like to know if i can monitor the network through the VPN connexion.
Thank's for y...
Tue, 10 Jun, 2025 at 3:11 PM
Folks,
I have been using PRTG for years and have utilized it for resolving an untold numbers of issues. Currently I am seeing a response on a sensor for ping time on one of my client's data circuits which I have never seen before and wa...
Tue, 10 Jun, 2025 at 3:11 PM
I've written a couple of custom sensors using powershell (which works when run in powershell).
However when these custom sensors are added to a device, an error appears:
Query Failed: Could not load file or assembly 'Microsoft.Sql...
Tue, 10 Jun, 2025 at 3:11 PM
Hi all,
Does anyone have a simple sensor I can use to count the DFSR Backlog? I found one on a website using a PowerShell script, but it keeps returning 0 backlogs, even tho I know there 400k+ backlogged files
Article Comments
...
Tue, 10 Jun, 2025 at 3:11 PM
I would like to add devices to the PRTG via API using python script. Is it possible and how I can do this?
Article Comments
Hello,
Thank you for your message.
Regarding what you would like to achieve, I'm afraid that it&...
Tue, 10 Jun, 2025 at 3:11 PM
How can I setup PRTG with dual NICs? I'd like one nic on network that most PC's are on to access via the web and another nic setup on a totally different network with seperate IP structure that the network infractructure I'd li...
Tue, 10 Jun, 2025 at 3:11 PM
I installed the trial monitor on my Desktop PC and really like the functionality, mostly for monitoring my NAS and WAN up time. 100 sensors would be more than enough to keep track of my switches etc.
I really don't want to run t...
Tue, 10 Jun, 2025 at 3:11 PM
hi there;
i have a downtime in an interface and we have relevant log in prtg log tab but we havent any log in log tab of this sensor!
explain the reason for this please.
thank you and best regard
Article Comments
Hello,
the Lo...
Tue, 10 Jun, 2025 at 3:11 PM
Hi,
I have written a customflowrules.osr file for my sFlow sensors as I found the one provided by PRTG a bit too basic. However, I can't see a way to load this file without restarting the PRTG core service. Am I missing something?
T...
Tue, 10 Jun, 2025 at 3:11 PM
I like to label my objects on the map with <h1>LabelX</h1> in the 'HTML Before' section. This works fine for most objects, except the traffic light. When I add this header, the traffic light object gets pushed out the bo...
Tue, 10 Jun, 2025 at 3:11 PM
User story
For some sensors it makes sense to keep historical data longer, e.g. power consumption. Other sensor data are not required for that long. A distinction would be desirable here.
Acceptance criteria
Allow users to choose how...
Tue, 10 Jun, 2025 at 3:11 PM
I understand users and their associated email address relative to managing notifications. What if I want to add a "Notification Contact" and them use that for notifications of someone that does not need a user ID, they just need ...
Tue, 10 Jun, 2025 at 3:11 PM
We install remote probes on new laptops, to get some status at the health like disk, battery, cpu and so on. But when these systems are not running, it result in a permanent error/alert message that mixes up with critical error from other i...
Tue, 10 Jun, 2025 at 3:11 PM
Is it possible to edit the SNMP Traffic sensor or create something else to have monitoring on configured/negociated interfaces speed (10, 100, 1000 Mbps)?
I know it's possible to create a custom sensor with ifspeed like this :
https...
Tue, 10 Jun, 2025 at 3:11 PM
Hello
I need to add a sensor to see if logs are activate on firewall.
I can have a physical disk sensor wich indicate i/o on the partition but when there is no write on the disk, my sensor is in alarm state.
I think about a ssh script....
Tue, 10 Jun, 2025 at 3:11 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I'd like to change the timeline of the sma...
Tue, 10 Jun, 2025 at 3:11 PM
Hello,
We recently came across an issue we would like to alert on with PRTG. Is it possible to monitor SQL Server Agent Jobs and send an alert/notification if they are running longer than a baseline or maybe a defined time? For example, t...
Tue, 10 Jun, 2025 at 3:11 PM
Hello.
Can PRTG switch to work with KERBEROS authentication instead of NTLM ?
For security reasons we need to restrict NTLM.
Article Comments
Hi there,
Please let me know what sensors you want to use here, so we can check if...
Tue, 10 Jun, 2025 at 3:11 PM
we have some scripts that write event log entries during the execution. Since we want to monitor whether or not those scripts are running, a WMI Event Log Sensor seems like a perfect solution. I set up about 10 sensors for 10 scripts so far...
Tue, 10 Jun, 2025 at 3:11 PM
Hello all, I started using PRTG a few weeks ago and liking it. I am setting up some sensors for Event Viewer IDs that I want to monitor and be alerted about. I am using the Win API event log as it seems to work better for me than the WMI. H...
Tue, 10 Jun, 2025 at 3:11 PM
Now i try with custom EXE/SCRIPT sensor and no luck...
I use modpoll.exe program ( https://www.modbusdriver.com/modpoll.html )
I don't know how to program script to run a program and read values.
In windows cmd i use command:
modpol...
Tue, 10 Jun, 2025 at 3:11 PM
Hello,
What is the latest version PRTG Network Monitor with Enterprise Console support? How can i download it?
(PRTG Desktop is terrible, and I want to keep using Enterprise Console)
Article Comments
Hello,
We no longer deliv...
Tue, 10 Jun, 2025 at 3:11 PM
I have written a device template for a software we use, this software ALWAYS runs on Linux-Systems.
So i want my device template "custom_software.odt" to include or reference our custom Linux-devicetemplate
Article Comment...
Tue, 10 Jun, 2025 at 3:11 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to clone sensors in PRTG des...
Tue, 10 Jun, 2025 at 3:11 PM
Hello,
As I'm preparing for switching to PRTG Desktop, I have run in to some problems and questions.
For testing purposes I have connected two of my servers in console, and I'm viewing them as a "Multi core dashboard"
...
Tue, 10 Jun, 2025 at 3:11 PM
Since Enterprise Console is deprecated and we don't find it very useful, is there anyway to uninstall it or disable it?
Article Comments
In order to uninstall the Enterprise Console from an end user machine you can follow th...
Tue, 10 Jun, 2025 at 3:11 PM
Hi
How can i create a Custom URL script in Webserver Stress Tool that specifies a URL sequence that a user must follow?
In the manual examples they only click in one URL...
Thank you
Article Comments
Hi Andre,
The manual...
Tue, 10 Jun, 2025 at 3:11 PM
Greetings all ,
We have Juniper SRX on our environment and when activate netflow V5/V9 or Jflow,there is no traffic been captured in PRTG...
below is the configuration at SRX Juniper ;
SRX> configure
Entering configuration mode
[...
Tue, 10 Jun, 2025 at 3:10 PM
We're hoping to automate some offboarding processes and would like to find a way to identify when a user is moved to a specific OU to trigger some other events. Can this be done?
Article Comments
Hello,
I'm afraid the...
Tue, 10 Jun, 2025 at 3:10 PM
wir wollen den WSUS Sensor in der MAP aus der Listenansicht ausblenden. Wie kann man einen einzelnen Sensor rausfiltern und ausschliessen ?
Article Comments
Hallo,
Leider lassen sich einzelne Sensoren nicht aus der allgemeinen...
Tue, 10 Jun, 2025 at 3:10 PM
hi there;
is there a way to report of sensors, devices or groups notification setting?
i want to see send email is active for which of the sensors.
thank you and regard
Article Comments
Hello there,
Thanks for the KB post.
I...
Tue, 10 Jun, 2025 at 3:10 PM
