kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi,
I'm totally new to PRTG and just began testing some monitoring my network at work. We have quite a small network (9 switches, 9 VMs, 2 Hyper-V Hosts). Now on some VMs, I have some applications running, that are quite important to ...
Tue, 10 Jun, 2025 at 2:57 PM
If a sensor goes down and then recovers, is it possible to make the sensor still push an alert that needs to be acknowledged? E.g. if an uptime sensor goes down for any period, and the device is restarted, could the sensor be made to still ...
Tue, 10 Jun, 2025 at 2:57 PM
Hi,
Is there a sensor that will notify me in case of a machine restart? (Windows/Linux)
Thanks,
Aviv Malka
Article Comments
Hello Aviv,
we appreciate your contact.
There are two sensors in PRTG which can measure uptime:
...
Tue, 10 Jun, 2025 at 2:57 PM
Hi, How do I get PRTG to send email alerts of warnings and errors?
Thanks
Article Comments
Hello Mark,
On object in the device tree (group, device, sensor...) you can enable different kinds of notifications.
If you are ...
Tue, 10 Jun, 2025 at 2:57 PM
Hi, I have been reading some posts about monitoring Windows Server Backup and as far as I got no one had a working solution (or at least not suitable for me).
Is there anyone who got this to work without having to go through too much trou...
Tue, 10 Jun, 2025 at 2:57 PM
I have 1 Cisco router that has 1 interface connected with SIP Provider. I am monitoring the WAN Interface but I need to know how I can monitor SIP Provider availability through ping and if it is not reachable, it should notification.
...
Tue, 10 Jun, 2025 at 2:57 PM
Hello.
I want to moniror my synology hight aviability.
For this i monitor if my synology is alive.
I monitor my Two synology.
Wen the synology is on Active mode I can see it alive on PRTG
When the syology is on Pasive mode I see...
Tue, 10 Jun, 2025 at 2:57 PM
I use PRTG to monitor signal levels (RSSI) on the wireless links. I have a custom sensor and I have custom triggers set up on each sensor that currently triggers and email when the signal falls too low (below threshold). I would like this...
Tue, 10 Jun, 2025 at 2:57 PM
Hello.
How can i modify notifications to remove some content i dont want to see in email?
For example i dont need graphs. I need them very simple, without any hypertext links and many words.
Article Comments
Hello and thank you ...
Tue, 10 Jun, 2025 at 2:57 PM
hi there,
is there any way to sending notification (alarm) when the traffic of port is above 80% from the limited traffic?
best regaurd
Article Comments
Hello,
Yes, this is possible. At first, you'll need to configure cor...
Tue, 10 Jun, 2025 at 2:57 PM
I cannot seem to figure out to to make PRTG notify me when a interface encounters errors.
I have ticked to monitor the additional channel "Errors In & Out".
I'd like PRTG to notify me if either of the "Errors per se...
Tue, 10 Jun, 2025 at 2:57 PM
Hello,
The sensors in the topic above show DOWN state when the PC is shut off and everytime I get notification which is not the way it should work. The worning should be for the PING sensor for example and not for sensors like CPU, memory...
Tue, 10 Jun, 2025 at 2:57 PM
Hi,
is there a prtg sensor to monitor dell vxrail manager ( from api rest) ?
if no, is there a workaround ?
Best Regards
Article Comments
Hi salhorgnem,
Thank you for your post.
PRTG provides some native Dell Sensors (e...
Tue, 10 Jun, 2025 at 2:57 PM
Hello,
Is there any way we can do a real time monitoring to track when traffic/connections is being dropped from specific IP addresses. Lets say for example from these 10.10.10.1/2 to 10.10.10.3/6
Our main objective here is to find out ...
Tue, 10 Jun, 2025 at 2:57 PM
We are migrating to PRTG from SolarWinds, but we need to know if PRTG can register an a cold-reboot or restart on a monitored device, just the way SolarWinds do.
SolarWinds on a log screen it register unreacheable states, reacheble states...
Tue, 10 Jun, 2025 at 2:57 PM
Hello,
I would like to change the return error moment.
For my exemple : I use the native SNMP printer sensor. I need to know when an imaging unit is totaly empty (at 0). I don't need the warning information in to the webconsole or i...
Tue, 10 Jun, 2025 at 2:57 PM
Es gibt auf einem unserer Server einen Windows Prozess, welcher nicht immer vorhanden ist. Eigentlich ist dieser nur zur Ausführung bestimmter Vorgänge aktiv und wird danach sofort wieder beendet.
Läuft das ordnungsgemäß, dann ist der Proze...
Tue, 10 Jun, 2025 at 2:57 PM
Is there a way to set a custom alarm? Our network as a lot of sensors and alarms going off constantly, and I don't want to be bogged down with emails all day.
More specifically, I'd like to set an alarm to appear whenever a device...
Tue, 10 Jun, 2025 at 2:57 PM
Dear Team,
i am new to PRTG and i have just installed it and I try to play with it.
I have read the guide but I don't see how to set up an alarm based on a bandwidth utilisation threshold using snmp. I have found the notification but ...
Tue, 10 Jun, 2025 at 2:57 PM
Hi
Does anyone could help me figure out the differences between channel setting based threshold warning and email notification threshold trigger.
1, The channel setting based threshold means you could set the warning and limited value on...
Tue, 10 Jun, 2025 at 2:57 PM
Can the Syslog receiver in PRTG Network Monitor 20 send the received syslog message as part of the notification? Assume in this case the notification is a syslog message.
Article Comments
Does the %message placeholder for notifi...
Tue, 10 Jun, 2025 at 2:57 PM
how can I make the data of a panel available in some API too?
att
Article Comments
Hello Daniel,
Thank you for your message.
Can you explain in details what you would like to achieve ?
Kind regards.
Nov, 2020 - Permalin...
Tue, 10 Jun, 2025 at 2:57 PM
At the moment, smaller deployments are unable to configure Azure Active Directory integration.
The following is found under System Administration:
Single Sign-On (disabled)
Your license does not support single sign-on.
Is that by ...
Tue, 10 Jun, 2025 at 2:57 PM
Hi,
I am unable to access prtg through Ios without VPN.
Is there a better way of configuring it without reverse proxy setup ?
Thanks,
Article Comments
Hello,
Thank you for your message.
The mobile application of PRTG r...
Tue, 10 Jun, 2025 at 2:57 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to have native Sensor by PRTG that can ...
Tue, 10 Jun, 2025 at 2:57 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
Hello,
We're using PRTG Desktop on a 4k screen and no ma...
Tue, 10 Jun, 2025 at 2:57 PM
I'm using the "WMI Free Disk Space (Multi Disk)" to monitor disks on a server, however, it does not see disks that are mounted on a mount point and not assigned a drive letter. Is there a way to monitor disk space (and other ...
Tue, 10 Jun, 2025 at 2:57 PM
I am seeing the following email issue:
Status sending Email: "[email address]" SPF Sender Invalid - envelope rejected - https://community.mimecast.com/docs/DOC-1369
How can I resolve this issue and restore my email notificatio...
Tue, 10 Jun, 2025 at 2:57 PM
I have a lot of different zigbee and Bluetooth mesh sensors connect via Wifi Hub.
i would like to add them to my prtg portal...
How I could add sensors connect to xiaomi gateway 3 to PRTG or some other wifi temperature sensor ?
How add ga...
Tue, 10 Jun, 2025 at 2:57 PM
Can I monitor my NextGen (Mirth) Connect installation with PRTG? What steps do I need to take?
Article Comments
This article applies to PRTG Network Monitor 18 or later
Monitoring NextGen (Mirth) Connect with PRTG
You can mo...
Tue, 10 Jun, 2025 at 2:57 PM
Hello,
We're getting the following error message on all of our SNMP sensors after upgrading our Windows 7 probe to the current version of PRTG: Could not create SNMP Session (-3000)-2011
I already tried to restart the PRTG Probe Servi...
Tue, 10 Jun, 2025 at 2:56 PM
Hello,
we just moved our PRTG server. Because we were running on pretty old PRTG version, we decided to install PRTG on new server and just manually set up our sensors. We have also few probes where we use Advance XML sensors to monitor ou...
Tue, 10 Jun, 2025 at 2:56 PM
I am trying to create a device template that adds a lot of Windows services, monitored by WMI, and filtered, but I am unable to find what META name to use for it, I cannot find any information in the manuals or in the KB with a list of incl...
Tue, 10 Jun, 2025 at 2:56 PM
Good Morning everyone.
I've tried to add the sensor "Event Log (Windows API)" to a server, but unfortunately I've receive the error "System Error. Code: 5. Access is denied".
I've read many KB, but I don...
Tue, 10 Jun, 2025 at 2:56 PM
can PRTG arrange the device under a group then only assign certain user to manage those.
Only some can see all but most of the user can only view those they manage?
Article Comments
Hello
Yes, this can be accomplished by using ...
Tue, 10 Jun, 2025 at 2:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to be able to export Sensor and Device ...
Tue, 10 Jun, 2025 at 2:56 PM
As it stands it's not possible to get sensor / device configuration information / details via API or to export a definition. We have a use case to do this so would appreciate if this capability could be added to the roadmap.
Art...
Tue, 10 Jun, 2025 at 2:56 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I sometimes want to use data which is not &quo...
Tue, 10 Jun, 2025 at 2:56 PM
Hi,
we monitor our Citrix-Workers with PRTG. After reinstalling the Master, the hdd c: was reformated via MECM and PRTG is showing a missing item since its serial number has changed.
How can we update all Workers in PRTG without having ...
Tue, 10 Jun, 2025 at 2:56 PM
I try to create a Dashboard-Map.
A Donutwrapper for each building with an overview of all sensors like you have predefined in your Mapobject "donut_w_name-font-dark.htm".
Now my challenge....
i try to configure that the color of ...
Tue, 10 Jun, 2025 at 2:56 PM
There is a desire to monitor user lockouts in my organization. This thread offers a script that comes close, but isn't quite what we needed, as it monitors all disabled users.
I've taken that script and adjusted it to only look at...
Tue, 10 Jun, 2025 at 2:56 PM
DSM shows thas I have a Disk Failure, seriously flawed.
But my PRTG Probe shows no error, everything is OK/GREEN.
I have removed the NAS again added, but again NO ERROR.
Does anyone has an idea?
NAS RS815+
DSM: 6.2.4-25556
Article...
Tue, 10 Jun, 2025 at 2:56 PM
Can someone post an example to disable the unusual detection using the http api for groupid=0?
Thank you!
Article Comments
Hello,
Thank you for your message.
To enable/disable the unusual detection, you can use the following...
Tue, 10 Jun, 2025 at 2:56 PM
Hi all,
I am working on a snmp trap receiver for a few devices in prtg to notify us when the Ethernet speed changed eg..1000 to 100. I currently have the trap receiver working but my messages are coming back as SNMPv2-SMI::enterprises....
Tue, 10 Jun, 2025 at 2:56 PM
After upgrade from 21.2xxxxxxx It seems like PRTG is no longer processing some aws cli commands inside powershell scripts that are run on a probe server. These were working before the upgrade.
We verified that our prtguser account is able...
Tue, 10 Jun, 2025 at 2:56 PM
My log table is now empty when trying to display all entries. It only works now if i specify "status changes", etc...
When i get a notice that there is a new log entry on the top right corner, if i click on it it goes to the emp...
Tue, 10 Jun, 2025 at 2:56 PM
I want to add links into the Comments tab for sensors, for instance linking a comment to the server or to furthur doumentation etc. I'd like both to be able to link with http and create other links like ftp or rdp-links for direct acce...
Tue, 10 Jun, 2025 at 2:56 PM
I'm getting the following error on a custom sensor:
Response not well-formed: "(A command that prompts the user failed because the host program or the command type does not support user interaction. Try a host program that supports...
Tue, 10 Jun, 2025 at 2:56 PM
Hello everyone, is there a way to monitor SPLUNK service via PRTG?
Thanks
Article Comments
Hi,
Thanks for contacting us.
What kind of monitoring are you looking for? It really depends on the vendor in this case SPLUNK to see...
Tue, 10 Jun, 2025 at 2:56 PM
I am using a powershell script to pull Remote Desktop Session information. This script works on the remote RD server.
Get-RDUserSession | Sort-Object -Property UserName | Format-Table -Property UserName, CollectionName, DomainName, Host...
Tue, 10 Jun, 2025 at 2:56 PM
Hi,
We have updated our ESXI Server estate to V6.7 from V6.5, our sensor is now reporting almost 200 unknown elements almost all related to CPU.
These have been supressed for now but how do I go about kicking this back into life?
A...
Tue, 10 Jun, 2025 at 2:56 PM
If I use PRTG Desktop and have configured multiple servers to monitor. If one of the servers goes offline will the desktop app notify me of the down server?
Article Comments
Hello,
If you set up
PRTG Desktop notifications the d...
Tue, 10 Jun, 2025 at 2:56 PM
I tried to turn on prtg core server service but got error 1068 the dependency service or group failed to start. I am using windows server 2016 version prtg 20.2.59.1689
Article Comments
Hi,
Thanks for contacting us.
This is ...
Tue, 10 Jun, 2025 at 2:56 PM
Hello,
Yesterday I updated our PRTG server from 20.3.61.1649 to 21.3.69.1333.
After that our EXE/script sensors that check Registration state and Amount of sessions of Citrix servers did not work anymore. I did not create the script, but ...
Tue, 10 Jun, 2025 at 2:56 PM
Hello,
I have a problem with the sensor PRTG for monitor costs on Azure, I have done all the steps
- App Registration
- Custom Role
Etc, the sensor returns me an error, and in the log file I find this:
2021-07-30 08:56:47.011094 D...
Tue, 10 Jun, 2025 at 2:56 PM
I just add a new PRTG on a computer today.
All it's OK until this moment :
I want to add somme notifications triggers for the root.
But there is noting inside and when I click on add an event Trigger nothing append.
Could somebody h...
Tue, 10 Jun, 2025 at 2:56 PM
I wanted to know if there's a way to curate the messages and send only portion that you want in email notifications.
The filters only filters by the whole snmp trap.
I would like to know if I can send a notification or get alerts ...
Tue, 10 Jun, 2025 at 2:56 PM
not receiving any messages form SNMP traps
I've verified that the server is receiving the traps and that SNMP v2c is being sent form remote host in Wireshark
even the counter in the trap receiver sensors increase , however no messa...
Tue, 10 Jun, 2025 at 2:56 PM
Is it possible to show the IP of the hops for routing to a target?
Article Comments
This article applies to PRTG Network Monitor 14 or later
Monitoring the IP Addresses of Hops
PRTG already comes with a Traceroute Hop Count ...
Tue, 10 Jun, 2025 at 2:56 PM
Hello dear,
please if possible on prtg to auto update sencors ?
let me explain; i have a router with more interface configured and monitor in prtg, so if i update some interface(rename) or i add another interface, PRTG can it update the mod...
Tue, 10 Jun, 2025 at 2:56 PM
Hi,
i want to monitor some environmental vaules from a CMC. I have actived SNMP and have the necessary OIDs to get the temperature etc. I can get the temp as an integer or string. The string value comes as something like "21.8 degree...
Tue, 10 Jun, 2025 at 2:56 PM
Bonjour,
Je ne suis malheureusement pas un développeur et je serais intéressé par un script afin de pouvoir récupérer des informations importante.
aujourd'hui, pour avoir une réponse en xml ou json j'utilise une API- SOAP qui est:...
Tue, 10 Jun, 2025 at 2:56 PM
When the old DNS sensor checked a domain name, the result could match one of several IP addresses. The new DNS v2 only allows one IP address or range to be verified as an acceptable return result. If the old DNS sensor is going to be remove...
Tue, 10 Jun, 2025 at 2:56 PM
Nach dem Update auf 21.2.68.1492+ funktionieren diverse Sensoren nicht mehr. u.a. der Sensor zur Aktualitätsprüfung einer Logdatei:
param(
$serverName,
$path
)
Invoke-Command -ComputerName $serverName -ArgumentList $path -ScriptBlock {
$p...
Tue, 10 Jun, 2025 at 2:56 PM
After updating to PRTG 21.3.69, my SNMP sensors show the Down status and SNMP error 2011. What is causing this issue?
Article Comments
This article applies as of PRTG 21.3.69
SNMP sensors show SNMP error 2011 after PRTG upda...
Tue, 10 Jun, 2025 at 2:56 PM
Hi,
I'm having a hard time to add a sensor that's just getting the temperatures without the states. I just want to have the 1.3.6.1.4.1.9.9.13.1.3.1.3 OIDs monitored.
I tried adding the snmpciscosystemhealth dynamic sensor wit...
Tue, 10 Jun, 2025 at 2:56 PM
Hi guys,
Recently our PRTG has become a mare to navigate as it can just whirl and whirl away without returning any results. I have to refresh multiple times before it would load correctly. Even when loaded correctly, it can be glitchy.
...
Tue, 10 Jun, 2025 at 2:55 PM
Hi,
On my system, every time PRTG updates, the installer requests a Windows reboot. I checked the installer log and found that it's complaining about the PRTG Server.exe. An example from the latest update is provided as follows:
202...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
Trying to setup notifications and having losts of issues. Installed Wireshark and it appears to not even try to connect Exchange 2013. Where are the logs held? Do they need to be turned on somewhere?
Article Comments
He...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
we have a kind of work plan for every employee in an excel sheet. That sheet contains data such as who is on holiday, who is in homeoffice etc.
As of right now i've always made a Screenshot of the current week and embedded it o...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
has somebody managed to succesfully monitor a Dell ME4 Storage?
I found the MIB-Files directly from Dell, but when i convert them to an oidlib i get nothing useful.
I just want to monitor disk space used / free, disk health etc. ...
Tue, 10 Jun, 2025 at 2:55 PM
I plan to use API calls to pause a sensor when a machine reboots to apply updates. However, I discovered the passhash can be used to access the WebUI, eg: "https://example.com/?username=apiuser&passhash=1234567890".
This is ...
Tue, 10 Jun, 2025 at 2:55 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want to be able to have a more granular choi...
Tue, 10 Jun, 2025 at 2:55 PM
Hi, from where are the http queries made with the http sensor of the prtg? From the probe or from the device?
Article Comments
Hello,
Most sensor queries (including HTTP sensors) are made from the PRTG Probe service. And theref...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
I want to test wan speed in Draytek. I have configured 2 wan in Draytek and PRTG can check my 2 wan
information, I see log wan 1 but still do not understand its meaning as shown in the picture
https://imgur.com/a/sOxXlxh
...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
I created a new Lookup file for a exexml sensor.
Sadly it doesn't apper in the channel lookup list.
Hear my file:
<?xml version="1.0" encoding="UTF-8"?>
<ValueLookup id="a_veeam.backupsta...
Tue, 10 Jun, 2025 at 2:55 PM
Hi,
Running version 21.3.69
Just in the process of setting up AD auth and finding that the drop down box to select an AD group does not show all groups.
I've not found a pattern to determine if there's something different between ...
Tue, 10 Jun, 2025 at 2:55 PM
Greetings, we have recently implemented the Active Directory Group, Protected Users. It is recommended by Microsoft to put all Domain Admin accounts into this group, including our account used by PRTG for accessing WMI on monitored servers...
Tue, 10 Jun, 2025 at 2:55 PM
Hello Paessler Support Team
We would use the UPN for our PRTG logins. PRTG is AD integrated and username login works.
Can you help us?
The goal would be logins with user@domain
Regards
Severin
Article Comments
Hi Severin,...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
We have to monitor 2 gateways.
I created a business sensor but it doesn't work as expected.
- We want a warning, if 1 is down
- We want an error but only, if both are down for longer than 1 hour
We have a standard ping senso...
Tue, 10 Jun, 2025 at 2:55 PM
Hi, I want to monitor my Windows 2-tier CA. I would like to check mainly the AIA and CDP endpoints (existing and valid). My idea would be to monitor an Endpoint Certificate issued by the CA and check for the following:
All CDPs. of the chai...
Tue, 10 Jun, 2025 at 2:55 PM
Good evening,
Im currently setting up an PRTG POC for a company with around 5000 devices. Normally i would create Auto-discovery groups for each segment of subnet E.g Printers, Servers, Switches, Routers. Now im facing a weired problem......
Tue, 10 Jun, 2025 at 2:55 PM
I want to utlilize the SNMP Custom Advanced Sensor to monitor the HA status of Fortigate units. The OID's are 1.3.6.1.4.1.12356.101.13.2.1.1.12.1 and 1.3.6.1.4.1.12356.101.13.2.1.1.12.2. The first one is the status of the primary and ...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
Could you advise how to configure it. It doesn't work.
I created the sensor.
- I added 2 objects (ping sensors) to channel A, Error 50/ Warning 25
- I can't remove the title from the 2nd channel that i don't need?!
- What...
Tue, 10 Jun, 2025 at 2:55 PM
Is there a way to monitor usage of a QNAP's LUN? I ran auto discovery on my QNAPs but it only pulled physical drive sensors. I don't see my iSCSI LUN. On the Windows server that the iSCSI target is configured, it doesn't show th...
Tue, 10 Jun, 2025 at 2:55 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user, I want the Veeam Backup Sensor to consider al...
Tue, 10 Jun, 2025 at 2:55 PM
What sensor and OID do I need to read out the temperature from the following device:
"Web Thermograph, 10/100BT, 12-24V"
https://www.wut.de/e-57605-ww-dade-000.php
Article Comments
Hello,
Thank you for your message...
Tue, 10 Jun, 2025 at 2:55 PM
Want this feature implemented? Please upvote! Posts in this thread won't be published. Read Me!
User Story
As a PRTG User, I want to monitor my 3PAR storage appliances (Product homepage).
Details of User Story
Just like the ...
Tue, 10 Jun, 2025 at 2:55 PM
Hi,
I am having an issue. I want to be monitoring the RSL, TX and RS power level of a trunk interface connected to a Huawei layer 3 switch on my network. I have tried different ways of doing that but none is yielding any result.
i can m...
Tue, 10 Jun, 2025 at 2:55 PM
Had an issue recently where a server had failed and the ping sensor was obviously Down, however, even though the server was off the entire time PRTG would periodically switch state to Unknown and then back to Down.
The problem being of c...
Tue, 10 Jun, 2025 at 2:55 PM
Hello,
We are in the process of implementing PRTG network monitor and by request from the customer, they would like to be able to turn off/on specific port (Cisco/Palo Alto) that reports unusual behavior.
Is it possible to do so via &...
Tue, 10 Jun, 2025 at 2:55 PM
I want to obtain 95% via API request, API is able to get all the values but then i need to process outside the tool. I want to obtein 95% directly.
Article Comments
What API call are you currently using?
Nov, 2016 - Permalink...
Tue, 10 Jun, 2025 at 2:55 PM
Hi, had a sensor probe checking for security audit event id 4070 to flag account lockouts within AD on all my DCs across the domain. All working fine until yday. Above message is appearing, any ideas on where to start investigating?
...
Tue, 10 Jun, 2025 at 2:55 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User story
As a PRTG user / developer, I want the Advanced EXE/Script Sen...
Tue, 10 Jun, 2025 at 2:55 PM
Hi All,
Wanted to configure our TextMagic SMS service with our PRTG core server to implement SMS notification.
would appreciate your help if you already set up this configuration:
custom URL and parameters
TextMagic side and needed c...
Tue, 10 Jun, 2025 at 2:55 PM
Hi,
I want to get an 95th percentile value in header but when I tried this url:
https://***/api/historicdata.xml?id=42600&sdate=2021-07-01-00-00-00&edate=2021-07-04-01-00-00&usecaption=1&avg=0&pctavg=300&pctshow=tr...
Tue, 10 Jun, 2025 at 2:55 PM
Hi,
As per my title really ...
I'm trying to identify what ifindex a particualr sensor is using to monitor a specific port. Can anyone help advise if this is possible to find? And how - thanks.
S.
Article Comments
Hi S...
Tue, 10 Jun, 2025 at 2:55 PM
Has anyone used the FT functionality on a PRTG server running in a VMware environment?
What we are looking for is any information on the stability of the backend database in this scenario.
Our concern would be is there any history of da...
Tue, 10 Jun, 2025 at 2:55 PM
First updated PRTG desktop and saw netflow stopped. Then updated server, issue remains. All netflow has stopped working.
Article Comments
Hello,
You can use our Netflow Tester to check if your PRTG Servers still receives val...
Tue, 10 Jun, 2025 at 2:55 PM
Hi Dear
I have a cluster with 3 nodes and my prtg version is 17.3.33.2753+.I want to delete one of the cluster nodes and shutdown it down ?how can I do it? please help
With kind regards
Article Comments
Hello,
Thank you for...
Tue, 10 Jun, 2025 at 2:55 PM
