kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Java update checker runs frequently jucheck.exe in %Javahome%\Java update. But there is only a popup window telling me if Java is up tp date or not. No entry in eventviewer or anything else. What I like to get is a PRTG sensor telling me if...
Tue, 10 Jun, 2025 at 10:02 PM
Hi,
I have read through the KB about customising map object. I created a custom Alarm Data Table by creating my own map object based off tableA0 in the C:\Program Files (x86)\PRTG Network Monitor\webroot\mapobjects folder.
I understand...
Tue, 10 Jun, 2025 at 10:02 PM
After updating to PRTG version 16.3.24.4979/4980, some of my HTTP sensors and other sensors which are based on HTTP requests show a down status because they fail to establish a secure connection.
The complete error message is:
Failed t...
Tue, 10 Jun, 2025 at 10:02 PM
looking to see how the default graphs 20min, 2 hr, 48hr 30 day, 365day might give us some intermediate time stops
ie 4, 6 12 hrs...
found this article
https://helpdesk.paessler.com/en/support/solutions/articles/12193-how-can-i-add-a...
Tue, 10 Jun, 2025 at 10:02 PM
I'm trying to configure the Auto-Update feature in PRTG. We have a webproxy which uses Web Proxy Autodiscovery Protocol (WPAD) and authenticates users with Active Directory.
I configured the proxy settings in PRTG but no matter what us...
Tue, 10 Jun, 2025 at 10:02 PM
Hi, I'm new to PRTG and I've just setup two servers clustered together one a master the other the failover. I installed the failover without configuring anything other than the questions asked by the installer, i.e. email, license ...
Tue, 10 Jun, 2025 at 10:02 PM
Hello,
We are very happy about the Windows Physical Disk I/O Sensor. We use it to detect sudden slow downs in Avg Transfer Time. After the latest update, an odd behavior started to occur.
At a random time out of office hours, ALL Disk I...
Tue, 10 Jun, 2025 at 10:02 PM
Strange issue...
Every day there will be one device (Windows server) which is getting Free Space results from a totally different server for about 20 minutes.
E.g.
Server1 Free space will show C drive=12GB free and this is true.
the...
Tue, 10 Jun, 2025 at 10:02 PM
I try to monitor an Oracle RAC database server and cannot achieve this. Which mode does PRTG use to connect to these devices? Are there limitations for monitoring?
Article Comments
Important note: The information in the article ...
Tue, 10 Jun, 2025 at 10:02 PM
Hi all,
It the uptime of a sensor calculated for the period of time that the sensor is added and receiving data, or based on another period. I don't mean the uptime-sensor but when I open detail of a sensor, I see info like;
Last Sc...
Tue, 10 Jun, 2025 at 10:02 PM
Hi
The channel names in the graph legend are truncated after about 12 characters...
Is it possible to force the graph legends to show the full channel names?
I looked at this forum topic, but it's only related to reports..
https://h...
Tue, 10 Jun, 2025 at 10:02 PM
I want to send only the last syslog message by an e-mail message. But I find just the placeholder only for the last 20th Messages.
Thank you
Article Comments
Dear Huxhage
That is correct, there are just placeholders for the l...
Tue, 10 Jun, 2025 at 10:02 PM
Hallo,
wir haben aufgrund von Stabilitätsverbesserungen vor, die Probe Services, von den Core Servern abzukapseln.
Vorab unsere Umgebung:
2 x Core Server (Failover)
2 x Probe Service auf den Core Systemen.
5 x Probe Server
Der...
Tue, 10 Jun, 2025 at 10:02 PM
We have a SQL sensor that is working just fine. When we created a new SQL v2 BETA for the said sensor, we are getting a "No Valida Datatable was Returned" error. The query looks for the top service which is running slow. If the qu...
Tue, 10 Jun, 2025 at 10:02 PM
I have a .Net application that compiles an inventory of all HTTP Transaction sensors (something like 120 sensors) with a specific tag and updates the HTML transactions with updated values, utilizing PRTG's API:
/api/setobjectproperty....
Tue, 10 Jun, 2025 at 10:02 PM
Hi,
Where does PRTG get its hardware status information from? I have one sensor reporting a memory error. When I login to the host locally the health status page is all green(no memory errors). The same goes for the hosts' IMM(IBM) an...
Tue, 10 Jun, 2025 at 10:02 PM
since we did the latest MS updates, the Windows update Status sensor refuses to work, it throws the message below. Our PRTG Installation is the latest producion release, anyone an Idee what went wrong here...all our other sensors including ...
Tue, 10 Jun, 2025 at 10:02 PM
Hi
After update to 16.2.23.3270 version. Windows Update Sensor started to fail on the most of windows 2012 servers. This is the message.
@Could not retrieve update data. Please make sure your WSUS is configured correctly. (code: PE205...
Tue, 10 Jun, 2025 at 10:01 PM
We need an MS-SQL sensor wich send us the query execution time and the result of the query every time when it is run. How can we do this?
Article Comments
Dear Admin
That is not possible. There is an indirect way, though it is...
Tue, 10 Jun, 2025 at 10:01 PM
Hi,
I have a sensor(EXE/script) that runs a powershell script. This script formats some XML into quite some data and outputs it to PRTG with the Write-Host cmdlet.
When I include the output in one of the generated mails with the %lastme...
Tue, 10 Jun, 2025 at 10:01 PM
I love the VMware Virtual Machine (SOAP) sensor as it shows a lot of detail that is VM-specific. However, when a VM moves from host to host I end up getting a "Down" alert on the source host telling me the VM can't be found, ...
Tue, 10 Jun, 2025 at 10:01 PM
Hello,
As stated in title.
Which sensor would be good to see which windows users is currently logged in on certain machine?
Thank You for reading.
Article Comments
Dear Vedran
Please find the alternatives here.
Oct, 201...
Tue, 10 Jun, 2025 at 10:01 PM
Hello!
I'm trying to create new custom map object for PRTG map in folder
C:\Program Files (x86)\PRTG Network Monitor\webroot\mapobjects.
Now I have object like this:
<!--New Gauges: Radial gauge-->
<div class="ma...
Tue, 10 Jun, 2025 at 10:01 PM
I setup a SNMP trap and I am collecting data but it is not triggering notifications.
I have a filter for 1.3.6.1.4.1.30586.14.99 and an error filter of bindings[1.3.6.1.4.1.30586.14.99,0] so that it triggers on value=0 but I do not get not...
Tue, 10 Jun, 2025 at 10:01 PM
Hi, team
I have near 30 netflow v9 sensors in my PRTG installation. At last time folowing message frequently seen in box
Flow processor buffer full (code: PE110)
I check my sensors once more, they have not filters and work in distinct ...
Tue, 10 Jun, 2025 at 10:01 PM
When using API to list all the groups, location field is shown as empty, even though location is explicitly specified for all groups. It works for devices that inherit locations from these groups (when listing devices with api).
The requ...
Tue, 10 Jun, 2025 at 10:01 PM
I am building dashboards to show the bandwidth on numerous network interfaces. I need a clean look that provides a static scale on the graph. In other words, I want all the graphs to always be at the same scale - 1Gbps in my case. Right ...
Tue, 10 Jun, 2025 at 10:01 PM
Hello,
I'm wondering if there is a way to change color of this graph:
http://i.imgur.com/aoI5Fyh.jpg
For example if it's 0 that it's red and when it's on 1 that it's green?
This is a custom WMI senzor for active RDP....
Tue, 10 Jun, 2025 at 10:01 PM
Is there a way to set the keyword search for a group of endpoints to the same thing via a variable? For Example, I would like to use a software version check of my network switch that will show me a warning when they are not up to date. Now...
Tue, 10 Jun, 2025 at 10:01 PM
Hi,
I have a problem that i cannot explain. We are using PRTG to monitor the Network traffic on our Watchguard M300 and everything is fine. But every day at the same time, around 12pm, we will get the error message on the interface that ...
Tue, 10 Jun, 2025 at 10:01 PM
Good Day,
I wish to monitor and build stats based on Bind DNS on a Solaris 11 System,A graph which basically displays querries send,received failed etc. Is it possible to achieve this with PRTG Network Monitor and is there a thread\link i...
Tue, 10 Jun, 2025 at 10:01 PM
Ich möchte einen Sensor auf Fehler setzen, wenn ein bestimmer Wert für eine längere Zeit überschritten wird. Z.B. CPU-Auslastang > 95% für mehr als 15 Minuten. Meine Idee ist es, dass ich den Sensor bei mehr als 95% auf Warnung setze, k...
Tue, 10 Jun, 2025 at 10:01 PM
I Need to generate an executive report to upper level management per weekly basis and provide them a quick insight of bandwidth / latency changes on network but as an aggregate graph.
it seems like report configuration is too detail, mean...
Tue, 10 Jun, 2025 at 10:01 PM
Hello, I have the following set up:
- TP-Link Gigabit Load Balance Broadband Router TL-ER5120 as my main router
- 2x fibre broadband WAN connections upstream (using original Virgin and TalkTalk routers)
- a few access points downstream of...
Tue, 10 Jun, 2025 at 10:01 PM
I have multiple sensors with a mutex that runs a custom exe that may take 10 seconds to execute. The timeout set to 20 seconds.
I often get an error result with message "Timeout caused by wait for mutex (code: PE035)" This error...
Tue, 10 Jun, 2025 at 10:01 PM
Hi,
Im looking at getting my existing sensors migrated to v2 , struggling with the first one though and its very simple.
Its a replication check to ensure slave services are running, i current just run the below query and use post proc...
Tue, 10 Jun, 2025 at 10:01 PM
I have used SNMP for account lockout alerts in the past, as well as various other event IDs that the client/company would consider "immediate notification" kind of things. I configured EvntWin as it should be, I created a custom ...
Tue, 10 Jun, 2025 at 10:01 PM
Hi.
Is there an overview of all scheduled maintenance ?
I would like to see all which is planned. (Rightklick, "Pausieren" -> "Einmaliges Zeitfenster für Wartung")
Article Comments
This will be available...
Tue, 10 Jun, 2025 at 10:01 PM
Hi, i'm having the error: Not connected. Error in content when i triy to connect in client windows to the server, it only happens with my computer, i tried to access via https://nomeoftheserver and it works.
i have tried to unistall th...
Tue, 10 Jun, 2025 at 10:01 PM
Hi All,
i would like to check CPU Load on GROUP of Machines or Servers?? like i have created a group (RENDERFARM) inside RENDERFARM Group i have added 50 PC's also added Sensor for each RENDERMACHINE Like (CPU Load,Physical Memory Us...
Tue, 10 Jun, 2025 at 10:01 PM
Strange issue , we have created several exe sensors which work fine. 2 sensors that we have created lately use
System.Windows.Forms.WebBrowser object
within console exe. Console tests fine in command window, but when added as a senso...
Tue, 10 Jun, 2025 at 10:01 PM
In this example, I'm using the domain office and the username djcrumple and I'm using PRTG v13.
System Administation > System & Website > Active Directory Domain is set to office and I've created a user group in PRTG...
Tue, 10 Jun, 2025 at 10:01 PM
Can I customize the graph view? I want to remove the percent value on the right hand part of the graphs.
Article Comments
Hello,
I assume you want to remove the percentage scale of the Downtime channel, right?
To achieve this,...
Tue, 10 Jun, 2025 at 10:01 PM
I'm attempting to interface into the PRTG server from a in-house application using the Mini-Probe API. I've successfully sent a "/probe/announce" request and my probe and sensors are appearing in the web interface.
I...
Tue, 10 Jun, 2025 at 10:01 PM
Dear Ms./Mr.
Our School use PRTG network monitoring tool. (with 500 sensor)
I'm very satisfied the monitoring tool.
I would like to ask there are any possibility to manually configure, setup one ore to site into the Cloud HTTP moni...
Tue, 10 Jun, 2025 at 10:01 PM
Dear sir, madam,
recently we asked our Service Provider to set up netflow on their routers, so we could monitor the traffic.
This service provider uses Huawei's Netstream protocol (basically "netflow").
We do see the tr...
Tue, 10 Jun, 2025 at 10:00 PM
Not sure if I'm using Libraries correctly...
...but this is what I'm looking for:
If I create a new library and then i want to (e.g.) create a new library folder for all my sites, every time I add a new site group folder, I also...
Tue, 10 Jun, 2025 at 10:00 PM
I know the sensor is in beta. That said, I noticed that when a device does not report data for a channel in the sensor PRTG records the value as 0 instead of null. This greatly affect number averaging. In the HTTP PUSH DATA ADVANCE sensor, ...
Tue, 10 Jun, 2025 at 10:00 PM
I want to start rolling out PRTG to all of our clients to monitor Internet and Bandwidth.
I keep running into issues when trying to add the SNMP Sensor.
I specify the external IP (188.39.102.170) of my client but get the error:
Sensor ...
Tue, 10 Jun, 2025 at 10:00 PM
In Traffic graphs I can see the max an min "points" but there is no value for that point visible. How can I enable it?
Article Comments
Dear hhammerl
Usually the values should be visible. If they are not, please cont...
Tue, 10 Jun, 2025 at 10:00 PM
I have added a failover node to one of my core servers and now have a Master and single Failover node. I have a few remote probes attached to the Master but these are not showing up on the failover node.
I have another Cluster that also h...
Tue, 10 Jun, 2025 at 10:00 PM
Can I create a sensor template from an SNMP table sensor?
I want my switches to track based on the IOS assigned value of "Te1/1/4" and not the ifindex. I have a lot of switches to add this sensor to and dont want to do it again ...
Tue, 10 Jun, 2025 at 10:00 PM
I'm trying to add a SNMP Bandwidth sensor to a Cisco SG200 small business switch. I receive the following error:
SNMPERR_BAD_ASN1_BUILD (SNMP error # -11)
I feel like it's probably a config problem, but I need to know what caus...
Tue, 10 Jun, 2025 at 10:00 PM
From a resource perspective, which is better to use from a PRTG server, SSH or Powershell?
I have the option to write a script running from a Linux server via SSH or a Powershell from PRTG to a remote Windows server. It's for checkin...
Tue, 10 Jun, 2025 at 10:00 PM
Hello, I have a Cisco stack of 3 switches.
When I use the Cisco CPU sensor, I only get a single set of CPU stats.
How can I see the CPU stats for each member switch of the stack ?
Thank you kindly.
Article Comments
As far as I&#...
Tue, 10 Jun, 2025 at 10:00 PM
We are using prtg at out office to monitor our network devices scattered around the world, the thing is that at some places we have so many devices that they actually are really close on the map and we want to move the device icon by hand ...
Tue, 10 Jun, 2025 at 10:00 PM
no response (check: firewall, routing, snmp settings of device, IPs, SNMP version, community, passwo
Hello,
I am trying to add the senor SNMP Disk Free on my NAS box but it would not allow and I get the SNMP error # 2003. I tried to run the SNMP tester and coming back with the same error. Now for this specific box, the drivers are encryp...
Tue, 10 Jun, 2025 at 10:00 PM
Hallo,
der Windows Update Status-Sensor läuft eigentlich gut, nur leider gibt es grade bei unseren Hyper-Vs Probleme bzw. keine Daten zurück. Es handelt sich dabei um einem physikalischem Windows 2012 R2 (nicht in der Domäne). Angesteurt ...
Tue, 10 Jun, 2025 at 10:00 PM
Hello,
I would like to use functions for PRTG API.
I remarked that function are avaible from webroot\api, but I don't know what are their usage.
Is it possible to get a list of API functions and their usage ? (for example : pause....
Tue, 10 Jun, 2025 at 10:00 PM
Hallo zusammen,
kann man eigentlich das Hintergrund-"Gitter" von PRTG-Graphen komplett oder in einer bestimmten Achse (z.B. sollen nur horizontal diese Linien angezeigt werden) ausblenden?
Gruß und Danke!
Jan
Article Com...
Tue, 10 Jun, 2025 at 10:00 PM
We currently have 2 installations of PRTG running around 24,000 sensors. We are going to get a third server, but we would like the sensorID's to be different on the different servers for our ticketing system. Is there a way to stat Se...
Tue, 10 Jun, 2025 at 10:00 PM
Hi
I have created a DFS monitoring sensor that works and I would like to bring it to the PRTG community
How can I do this?
I would like to share the powershell script and screenshots of the sensor settings combined with a short descript...
Tue, 10 Jun, 2025 at 10:00 PM
I have created a netflow v9 sensor from a device that sends flows from multiple source subnets. The netflow sensor is only displaying data from one of the many sources it's being sent. I have verified ,via packet analysis, that the mu...
Tue, 10 Jun, 2025 at 10:00 PM
I am trying to add an HTTP XML/REST for Palo Alto Firewall. I followed the steps described in this KB article:
How to Monitor Palo Alto Firewall through XML API
However, I am not sure what my XML Node is. I tried ethernet1/1, throughput,...
Tue, 10 Jun, 2025 at 10:00 PM
Hi,
Is it possible to import several sensor created in WHATSUP into PRTG ?
Article Comments
Hello,
Thank you for your KB-Post. I'm afraid there is no import tool for this. Please add the sensors manually. The Auto-Discover...
Tue, 10 Jun, 2025 at 10:00 PM
I have a netflow v9 sensor for one device(device1). And a netflow custom v9 sensor for another device(device2). The results for the custom sensor for device2 are displaying the exact same thing as the sensor for device1. Is there a metho...
Tue, 10 Jun, 2025 at 10:00 PM
Hi, I'm looking to create a sensor to use with SQL 2008 R2 servers to check for blocking. I have several potential custom queries which work for this, but the way they operate is under normal conditions they return nothing at all. In th...
Tue, 10 Jun, 2025 at 10:00 PM
I had a problem with the SSH inodes sensor coming back with no information after I rebooted 4 servers. The sensor was greyed out most of the time, but would also bounce into an error state some.
I tracked it down to not having one of the...
Tue, 10 Jun, 2025 at 10:00 PM
Hallo,
wie kann ich Raid Systeme mit den neueren Avago Controller (vormals LSI) überwachen?
Article Comments
Hallo,
Sollte der Hersteller MIB Dateien anbieten, können Sie den MIB Importer verwenden um diese in PRTG zu importier...
Tue, 10 Jun, 2025 at 10:00 PM
Hello. What I'd like to do is this:
(The domains here have been changed to protect the innocent.)
The PRTG server we have currently is accessible via prtg.contoso.loc , an internal domain. It uses AD authentication and it uses an i...
Tue, 10 Jun, 2025 at 10:00 PM
I want to assign some devices (for example, VM clients) to a particular parent (a VM host). Settings for the clients to not allow me to assign a specific parent (I can apply the parent device name as a tag). Similarly, the host device setti...
Tue, 10 Jun, 2025 at 10:00 PM
why it only has 100 sensors, when i entered new trial license key??
I just want to extend free/trial license
Article Comments
Dear orientorient,
Thank you very much for your knowledge base post.
We need to take a look at the ...
Tue, 10 Jun, 2025 at 9:59 PM
Hello,
Is there a method to set up auto-discovery of sensors for a category of sensor type?
My specific scenario: I would like to set up regularly scheduled auto discovery for my ESX servers to add any new Virtual Machines (SOAP sensor)...
Tue, 10 Jun, 2025 at 9:59 PM
Hallo zusammen
Ich überwache mittels einem PING unsere Netzwerk-Infrastruktur.
Dazu setze ich alle 30 Sekunden einen Ping uaf die IP-Adresse des Gerätes ab. Dies funktioniert alles sehr gut.
Nun möchte ich aber gerne folgendes einrichte...
Tue, 10 Jun, 2025 at 9:59 PM
Can I generate a report only with peaks of WAN bandwith sensors? Algo a report with moments of WAN d
I need to generate two differets reports including WAN bandwith sensors: one thats shows me ONLY the moments of sustained peak bandwith.
And the second one including ONLY downtime moments.
Could I generate those tipes of automatic reporti...
Tue, 10 Jun, 2025 at 9:59 PM
Good afternoon,
I have setup an HTTP Push Data Advanced Sensor as described here:
How can I monitor and automatically restart a service on a Linux host?
I have not received any data so I attempted to run the command via the Linux sh...
Tue, 10 Jun, 2025 at 9:59 PM
Hello,
I would appreciate a little help setting up a custom SNMP sensor to monitor signal strength on a Cisco 1532E wireless bridge device. I went through and found the OID and created the oidlib via the MIB Importer. I then saved it to \...
Tue, 10 Jun, 2025 at 9:59 PM
Is it possible to retrieve a list of devices that have no sensors configured yet?
Article Comments
The following script will allow you to do that. Simply save it as Get-EmptyDevices.ps1 and run it on the PRTG server within a Pow...
Tue, 10 Jun, 2025 at 9:59 PM
Is there a way to generate a report on devices that don't have any sensors associated with them?
Article Comments
Why would you want to do that? There's nothing to report on ... ;)
Oct, 2016 - Permalink
Exactly!...
Tue, 10 Jun, 2025 at 9:59 PM
Hi, I need to change the Prtg from the server that is actually installed, but the old system administrator didn't leave the setup files nor the serial, how can I get this?
Article Comments
Hi there.
You can find this withi...
Tue, 10 Jun, 2025 at 9:59 PM
Hi,
I am trying to clone the windows api sensor and get system error 87 (The parameter is incorrect). This happens at the time of start-up sensor. This sensor is working on identical server (this is a cluster of two nodes).
i have no idea ...
Tue, 10 Jun, 2025 at 9:59 PM
I know how to change the default name column width of the default device tree view (in _Prtg.Core.js), but this setting does not apply to a device tree in a custom map. Is there a way to change name columnwidth in a map also?
Thank you.
...
Tue, 10 Jun, 2025 at 9:59 PM
Hi ,
Could you tell me when software is up and running, does that data send back to your server?
Or just all the data store in locally.
Thanks.
Article Comments
I think you are asking if PRTG sends your monitoring data (Or...
Tue, 10 Jun, 2025 at 9:59 PM
Hi all,
We are trying to create a map for our customers. We want customer to see the servernames on the map, but only those servers which have status "down".
To accomplish this, we are creating a custom map object based on a c...
Tue, 10 Jun, 2025 at 9:59 PM
I'm creating factory sensors for each of my app environments as kind of a rollup of everything that's going on, and I'd like the channels in the factory sensor to display the red-yellow-green thresholds that their child sensor/c...
Tue, 10 Jun, 2025 at 9:59 PM
Hi,
I would like to monitor several w3wp process memory usage per application pool.
I have several Application pools running on IIS and I would like to monitor the w3wp process of each one for memory usage and alert on threshold.
Is it poss...
Tue, 10 Jun, 2025 at 9:59 PM
Hi, I would like to remove the Notification tab to users who does not require to have access to the tab. When the user log on to the Web ajax, he/she does not need to see the Notification tab.
Thanks
Article Comments
Setting ...
Tue, 10 Jun, 2025 at 9:59 PM
I am trying to monitor a MS Radius server but i keep getting a error.
Error - RADIUS server is not responding
the configs i have are in this link
https://unsee.cc/dozenibu/
Is there something that needs to be done on the MS RADIUS s...
Tue, 10 Jun, 2025 at 9:59 PM
My prtg server cpu up to 100% every day, and its duration is about 6 hours, after that, the cpu come to around 20 %.
Could u help me to solve this issue? Thanks.
Article Comments
Since this will most likely require troubleshooti...
Tue, 10 Jun, 2025 at 9:59 PM
I have read a few posts on here about the various channel in a netflow sensor. I have been working on this a couple of days and I have included the standard channels and the list that another poster had compiled which appeared to be pretty ...
Tue, 10 Jun, 2025 at 9:59 PM
In the last time we got sometimes in some sensors error messages like
"Access violation at address 3FF7F6E5 in module 'PRTG Probe.exe'. Execution of address 3FF7F6E5"
In my opinion this messages occurs until our upda...
Tue, 10 Jun, 2025 at 9:59 PM
Does PRTG have any sensors that can monitor open file descriptors (preferably those associated with a specific user) on a Linux system?
Background: Our organization recently experienced downtime when our LDAP server hit an open file desc...
Tue, 10 Jun, 2025 at 9:59 PM
Hi,
Was wondering if it was possible to generate notifications to multiple admins in response to an increasing scale of alert?
For example:
Diskspace = 30% free - send an email to 3 admins
Diskspace = 20% free - send an email with high im...
Tue, 10 Jun, 2025 at 9:59 PM
A few weeks ago we changed the IP address of our server by adding a network card, and then disabling the old network card. I can connect to the server using the new IP address, but snmp no longer works. I started the tester and it only li...
Tue, 10 Jun, 2025 at 9:59 PM
I am trying to create Maps to display port traffic I have the current traffic in, traffic out, total traffic, but I would like to show Traffic Total (volume) for the last 30 days?
Is there an easy way to do this?
Thanks,
Article C...
Tue, 10 Jun, 2025 at 9:59 PM
Hi,
Using v15.3 on 2008r2 - we monitor SEP 12.1 on our workstations which PRTG helpfully added sensors for during autodiscovery once upon a time, but since the start on every PC the 2 sensors are in Warning status even though the last me...
Tue, 10 Jun, 2025 at 9:59 PM
Currently running PRTG network monitor. Exactly how can we monitor multiple interfaces on a cisco switch. We need to know if a interfaces is up\up if it were to go down\down or if the interfaces does down.
Article Comments
H...
Tue, 10 Jun, 2025 at 9:59 PM
For several HTTP sensors we get a sporadic response of "Connection closed gracefully" that vanishes by itself, without any interference. However there is no problem on the site, and also additional monitoring system does not show ...
Tue, 10 Jun, 2025 at 9:58 PM
If we pause a sensor or group by right clicking we are presented with a list of possible intervals.
If we try to pause the same sensor or group when it's open i PRTG and using the Pause icon in the upper right corner it does not provide...
Tue, 10 Jun, 2025 at 9:58 PM
i was watching some sql sensors in prtg and talking with a friend he told me that i can execute store procedures and sql queries and show in report the result of this query... is this true?? how can i do that?
Article Comments
...
Tue, 10 Jun, 2025 at 9:58 PM
