kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
I would like to count the number of files in a folder on a ftp server of certain types, e.g. count all xml files. As far as I can see the "FTP SERVER FILE COUNT SENSOR" can not filter by filename. Is there another sensor I can use...
Tue, 10 Jun, 2025 at 3:31 PM
I'd like to use the placeholder %group for the subject of Summarized Notifications. (Notification Templates).
I use the placeholder %group for e-mail subject, and it works fine. The Summarized Notifikation subject on the other hand look...
Tue, 10 Jun, 2025 at 3:31 PM
Today, we have restarted the IIS client server which have configured the sensors.
After the reboot getting an below mentioned error found in Perfcounter IIS Application pool sensor.
Error: (Unable to connect the specified computer, or th...
Tue, 10 Jun, 2025 at 3:31 PM
I'm using SNMP to get temperature and voltage values from your UPS.
Now the management module run into some issue and kept reporting the last value over and over. The value itself was within the limits, so no alert was raised.
Usually...
Tue, 10 Jun, 2025 at 3:31 PM
Anybody have an SSH advanced sensor script written that uses passenger-status --show=server? It returns JSON. I'm trying to get server health without needing to use http with never expiring auth credentials.
Article Comments
...
Tue, 10 Jun, 2025 at 3:31 PM
There are 3 options for the body of the email sent to the receipients.
HTML >which contains information in a formatted form
Text >which contains information in a formatted form
Text with custom content >empty body to fill by its ...
Tue, 10 Jun, 2025 at 3:31 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to monitor Lenovo ThinkSyste...
Tue, 10 Jun, 2025 at 3:31 PM
Hi PRTG team, I am testing IPFIX with Cisco NCS 5001 which only supports the IPFIX 315 format to send information to the collector, and I have configured the router as Cisco information guide and validation commands, but PRTG custom IPFIX s...
Tue, 10 Jun, 2025 at 3:31 PM
We are able to order our devices in the devices overview by alphabet.
It would be great to be able to do this with the ip addresses.
Article Comments
Tue, 10 Jun, 2025 at 3:31 PM
I know I can delete the sensors but why does PRTG detect App Pool_Total and IIS_Total if I uninstalled IIS from Windows Server 2012 R2?
I would like to uninstall whatever it is needed from my server because I do not use IIS on that server...
Tue, 10 Jun, 2025 at 3:31 PM
I am currently using threshold triggers to alert when disk free space drops below a certain percent. However, I would prefer to alert based on the rate of consumption. For example, a drive has been at 11% free for 6 months and has change ...
Tue, 10 Jun, 2025 at 3:31 PM
Hello everyone,
I've got an Oracle sensor that will elaborate a table like this:
Wardrobes | +10%
Beds | + 25%
Chairs | - 35%
Is it possibile to have a sensor that scan through the data and alert me when the percentage is over/und...
Tue, 10 Jun, 2025 at 3:31 PM
Hello,
I setup a syslog sensor which is successfully receiving messages from my SonicWall with one minor issue.
The sensor isn't parsing the different fields on the messages tab view.
Everything appears in the "Message" field...
Tue, 10 Jun, 2025 at 3:31 PM
I used the KBs for getting and importing my devices MIBs into PRTG. I put the file in the ..\PRTG Network Monitor\snmplibs but when I try and add an snmp library sensor, my new file is not in there. I see previously added ones, but not my...
Tue, 10 Jun, 2025 at 3:31 PM
If i use PRTG Historical data api call to fetch data in JSON form i get something like,
{
"datetime": "7/24/2020 12:09:00 AM - 12:10:00 AM",
"Days to Expiration": 73.0000,
...
Tue, 10 Jun, 2025 at 3:31 PM
Hi,
1. I set up a notification using Execute Program. The Parameters is:
%probe %group %device %name %sensorid %status %down %message
2. The code of powershell script:
$outfile = "C:\PRTGtoZendesk\ha.txt"
for ($i=0; $i -lt...
Tue, 10 Jun, 2025 at 3:31 PM
Dear Support Team,
Hello,
I have edited my PRTG architecture (Core and Probes layout) several times, and therefore i forced to change my probe's servers during these changes. So, i have many access keys in my core server now.
How can...
Tue, 10 Jun, 2025 at 3:31 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to authorize users located in more than...
Tue, 10 Jun, 2025 at 3:31 PM
Dear Support Team,
Hello,
I can show the graph png or svg with desired period via API (live and historic),
How can i show the "Sums Averages" table that exist under the graph in sensor's page in PRTG UI (live, custom or his...
Tue, 10 Jun, 2025 at 3:31 PM
I have a licensed PRTG installation monitoring 1000s of sensors on our internal LAN. The server is also on our internal LAN. I'd like to be able to publish the maps to the Internet but I really do not want to expose the LAN server to th...
Tue, 10 Jun, 2025 at 3:31 PM
Is there a SFTP File Count Sensor? or could I use the FTP file count sensor for SSH FTP? How should I set it up?
thankx in advance
Article Comments
Hi,
I'm afraid the FTP File Count Sensor does not support SFTP and at the...
Tue, 10 Jun, 2025 at 3:31 PM
One of our main routers started throwing this message and we are trying to determine if the fan is actually in a down state or not.
Error by lookup value 'Shutdown' in channel 'Fan 3 State (Fan 3)'
Ran thru some knowledge...
Tue, 10 Jun, 2025 at 3:31 PM
I can't add CPU statistics d-link 3200-52.
Article Comments
Hi there,
did you checked whether the d-link CPU OIDs are available on the target device?
The default PRTG CPU load Sensor uses the OIDs out of the "Host Re...
Tue, 10 Jun, 2025 at 3:31 PM
We migrated our PRTG to a VM last week, did everything by the KB PRTG made for Migration. After booting up the new PRTG VM Server we noticed our Sensor count had went from (5) Warning Sensors, (+-800) Good Sensors, and a few yet to be confi...
Tue, 10 Jun, 2025 at 3:31 PM
I am trying to get a full walk of my device. If I walk 1.3.6 it walks all the way up to a specific OID and fails every time. For some reason it only has an issue with that one OID. I can walk OIDs after that one just fine. How can I get...
Tue, 10 Jun, 2025 at 3:31 PM
Hello,
I'm trying to automate the monitoring of newly deployed devices.
Is there a way to select device template with API while creating the device ?
I can select the discovery type and schedule, but when it comes to checking devi...
Tue, 10 Jun, 2025 at 3:31 PM
Make the HTML map realtime instead of refreshed.
Article Comments
Hello,
I'm afraid this is not possible. the map needs to be refreshed to be up-to-date. You can however change the refresh interval to 1 second for example...
Tue, 10 Jun, 2025 at 3:31 PM
for my monitoring environment I would like to display a map on a TV, for this I have purchased a raspberry pi.
now i have been able to share a working folder with all kinds of devices but when i want to view it on the raspberry pi it alread...
Tue, 10 Jun, 2025 at 3:31 PM
I have some SNMP sensors that retrieve an integer value that represents a bit field of possible states. I only care about one of the bits in the returned value, but can't figure out a way to monitor for that single bit to be true.
Ide...
Tue, 10 Jun, 2025 at 3:31 PM
I use a lot of REST custom sensors in our PRTG instance. These sensors poll for JSON data exposed via HTTPS on another machine. The issue I have is that the downstream http server writes the JSON files to its webroot on a cronjob, therefo...
Tue, 10 Jun, 2025 at 3:31 PM
Hi,
I am doing couple of tests to integrate PRTG with Kaseya REST API. I could get HTTP REST API sensor working but having a problem with generating access token from Kaseya automatically while querying.
Below is steps to reproduce is...
Tue, 10 Jun, 2025 at 3:30 PM
Hi all,
I've forwarded the SNMP ports/service on UDP 161 in and out of my DGN1000 router, sending the outbound directly to 192.168.0.10, my PC's static IP.
When I try to add an SNMP Bandwidth sensor to the auto-detected router,...
Tue, 10 Jun, 2025 at 3:30 PM
We run version 18.1.38.11958 on our PRTG server, our web app is running the latest version and the TCP web port setting is set to HTTP port 80.
When we go onto our server and assign port 80 it brings up connection unauthorized. We have go...
Tue, 10 Jun, 2025 at 3:30 PM
Hi,
I'm trying to monitor Windows service status with WMI Service sensor.
Is there a way to do it without adding the monitoring account to administrative group?
Article Comments
Hi there,
Thank you very much for your r...
Tue, 10 Jun, 2025 at 3:30 PM
Hello,
I'm not sure if this has been asked for or if its possible. I did some google searching before asking here. Is there a sensor available that can just count the number of emails inbound and outbound for an Exchange Server? Excha...
Tue, 10 Jun, 2025 at 3:30 PM
Hi,
I would like to have the following functions:
if any of my monitored device is down, or exceed threshold open a ticket in Jira Serice Desk Server (not cloud) (PRTG > JIRA)
if the ticket is change to a status (for expample &quo...
Tue, 10 Jun, 2025 at 3:30 PM
is it possible to get 2 different messages on a free disk space sensor? i would like to get a warning at 10% disk space and when it is at 5% disk space an error
Article Comments
Hello,
Yes, you can do this by adding multiple S...
Tue, 10 Jun, 2025 at 3:30 PM
I have a computer with prtg running on subdomain1.domain.com and a web server running on subdomain2.domain.com which has a page with javascript that I am trying to get an ajax request to get sensor details via the PRTG API.
When I do this...
Tue, 10 Jun, 2025 at 3:30 PM
Hello,
I'm currently evaluating PRTG and I started writing some Python scripts for scanning Log-Files.
It basically worked, but i want to enter an Addiotional Parameter in the Sensor's Settings:
LogFilePath='C:/Temp/' ...
Tue, 10 Jun, 2025 at 3:30 PM
I would like all groups to inherit a trigger from root. I also have groups that are not so critical and i would like to put a trigger on the group that gets distributed to only to that group. Being able to use inheritance would make it ea...
Tue, 10 Jun, 2025 at 3:30 PM
I would like to have a sensor which is always green, but turns to a red "Error" status for a short while, twice a day.
I want to use this kind of sensor to intentionally trigger my SMS text message notifications to make sure the...
Tue, 10 Jun, 2025 at 3:30 PM
In Netflow sensors not showing Top Talkers, Top connectios and Top protocols sensors. Please work on it.
Article Comments
If you want to propose a new feature, please follow the steps provided here: https://helpdesk.paessler.co...
Tue, 10 Jun, 2025 at 3:30 PM
We use PRTG to monitor network devices and backhaul links but we would like to monitor all the way down to individual devices attached to each switch. Everything I've read about PRTG says that its not do able, however a workaround would...
Tue, 10 Jun, 2025 at 3:30 PM
hi . sorry for my English . i have prtg server in central office,i add branch office with its wan ip address to get snmp messages but none of the sensors work ,even ping sensor. i have ipsec tunnel with my branch office ,when i'm adding...
Tue, 10 Jun, 2025 at 3:30 PM
By default ( recommended ) firewall is turn on in windows 2016.
What's the rule (port number or other setting ) need to be created in order to allows the PING sensor able to ping the target server
Article Comments
Hello, ...
Tue, 10 Jun, 2025 at 3:30 PM
Hi There,
We have a lot of users working from home and I notice our Direct Access Statistics.ps1 script is not out putting any results to PRTG? This is the script:
Try {
$DAC = Get-RemoteAccessConnectionStatisticsSummary -ComputerName ...
Tue, 10 Jun, 2025 at 3:30 PM
When monitoring a website from behind the firewall and load balancer we monitor each website that answers with a FQDN that lists' its public IP address. For example we may have five web servers all hosting abc.com in the IP range 172.20...
Tue, 10 Jun, 2025 at 3:30 PM
Dear Stephan,
May I use your PrtgApi with plain Visual C++ 2017? Is the .dll compatible with a non managed code?
Kind regards, Vadim.
Article Comments
You may want to ask that in the Github repository of PRTGapi :)
Aug, 2...
Tue, 10 Jun, 2025 at 3:30 PM
Port scan occurs periodically even though the sensor is added using the procedure below
1) Adding a device
2) Checking No auto-discovery
3) Adding a ping sensor manually
4) Done
Port lists :
TCP 21,
TCP 25,
TCP 80,
TCP 110,
TCP ...
Tue, 10 Jun, 2025 at 3:30 PM
I am working on a lookup file that should change a sensor state to error, when an amount of inbound error packages gets greater than 0. In other words, when the value is not equal to 0. I only found the options to check if the value is equa...
Tue, 10 Jun, 2025 at 3:30 PM
We're using PRTG Version 20.1.57.1745+
Auto-discovery occurs periodically even though the sensor is added using the procedure below.
1) Adding a device
2) Checking No auto-discovery
3) Adding a ping sensor manually
4) Done
A...
Tue, 10 Jun, 2025 at 3:30 PM
I am trying to get PRTG to automatically put the name of the sensor at the end of the URL:
http://myhost.com/:8000/_count?target
Instead of target I would like to have the sensor name in the URL, is there Any way I could do this with the...
Tue, 10 Jun, 2025 at 3:30 PM
Will this sensor ever come out of BETA, and any idea when it will?
Also, reading the BETA disclaimer also saps me of confidence about this sensor even though the PRTG website proudly claims to support containers/dockers.
forgive my direct...
Tue, 10 Jun, 2025 at 3:30 PM
When I try to add the "SNMP APC Hardware" sensor, I receive the following error:
Sorry, the scan for available monitoring items has failed!
Could not create the SNMP Library sensor on device frx-ups-office-01 (frx-ups-office-0...
Tue, 10 Jun, 2025 at 3:30 PM
This is a request as it is not currently available.
It would be very useful to have html links within the comments area on devices and sensors.
Article Comments
Hi there, if you want to submit a new feature request, please foll...
Tue, 10 Jun, 2025 at 3:30 PM
Dear Team,
looking port base monitoring & alert, please suggest.
Article Comments
Hi there,
If you want to monitor interface ports, I recommend the SNMP Traffic Sensor. If you want to know if a port is open, please use the...
Tue, 10 Jun, 2025 at 3:30 PM
Please advise on the steps to migrate old server config to new server
Article Comments
Hello, you can refer to this article on this specific subject.
Aug, 2020 - Permalink
Tue, 10 Jun, 2025 at 3:30 PM
Exchange Database DAG: Mailbox Database 1003338310 (Exchange Database DAG (PowerShell)) Down (Error by lookup value 'Error' in channel 'Content Index State')
after reviewing the application logs, I found the error below: ...
Tue, 10 Jun, 2025 at 3:30 PM
Hi. I have a sensor of type "REST Custom BETA". It has multiple channels. For one of them I defined the "Value Lookup and Limits" to "Enable based on limits". Via the API I set the Upper Error Limit (limitmaxer...
Tue, 10 Jun, 2025 at 3:30 PM
Exchange Database DAG: Mailbox Database 1003338310 (Exchange Database DAG (PowerShell))
Down (Error by lookup value 'Error' in channel 'Content Index State'
Article Comments
Hi there,
the Exchange Database D...
Tue, 10 Jun, 2025 at 3:30 PM
Hi Team,
I am having trouble with the HTTP sensor on a local device. I am using it to ensure we can log into a power system or switch but I periodically get error on the sensor. Sometimes it will be fine and sometimes it will error. If i ...
Tue, 10 Jun, 2025 at 3:30 PM
Is it possible to monitor interface properties like the admin state, the operational state, the inbound and outbound errors and the alias from a Juniper EX3200 with PRTG? I know that it is possible to use the custom SNMP table sensor to get...
Tue, 10 Jun, 2025 at 3:30 PM
When I attempt to add a Hyper-V virtual machine sensor, I receive the following error:
8004100E: The namespace specified could not be found.
Anyone have a possible explanation for this?
Article Comments
Hello,
which exact ...
Tue, 10 Jun, 2025 at 3:30 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I would like a configuration option in the Set...
Tue, 10 Jun, 2025 at 3:30 PM
I would like to create a map which is divided into 4 quadrants. I want each one to show a different status donut of the previously mentioned different sites. Is this possible? Is there any custom HTML element that allows this feature?
Than...
Tue, 10 Jun, 2025 at 3:30 PM
How can I change the network usage unit? It is kbit/s, I need MB/s.
Article Comments
Hello,
This can be changed in the settings of the parent device at the Channel Unit Configuration-section.
Kind Regards,
Timo Dambach
...
Tue, 10 Jun, 2025 at 3:30 PM
I wonder, why it is not possible to pause a device from the Desktop application, but instead only via the web interface under certain circumstances:
It only occurs when
The Sensor (Ping), that causes the device dependency to pause is ...
Tue, 10 Jun, 2025 at 3:30 PM
Want this feature implemented? Please upvote! Posts in this thread won't be published. Read Me!
User Story
As a PRTG User, Administrator and System Engineer I want more performance
Details of User Story
Installations above 1...
Tue, 10 Jun, 2025 at 3:30 PM
There are several sensors on PRTG which monitor the load under Linux/Unix/MacOS systems. What is the difference between the load under these systems and the CPU load under Windows?
Article Comments
CPU Load on Linux
On Linux t...
Tue, 10 Jun, 2025 at 3:29 PM
I want to combine two different sensors and also use a lookup file in the combined sensor. The Sensor Factory would be good to combine two sensors, but as far as I know, the Sensor Factory is not able to use lookup files. Is there any other...
Tue, 10 Jun, 2025 at 3:29 PM
Sorry for the maybe weird question, but I am new to the area of using scripts in connection with PRTG.
I searched really long, but I found no way, how to get values from two SNMP Custom Table Sensors into one PowerShell script. When I could...
Tue, 10 Jun, 2025 at 3:29 PM
I try to get an OID string-value into the Custom Advanced Sensor. As I read before, it should not be possible to get string values directly into the sensor. So I implemented the OID into the name of the sensor. This worked pretty fine, but ...
Tue, 10 Jun, 2025 at 3:29 PM
Is it somehow possible to create a sensor template? I use the SNMP Custom Sensor to get interface properties from a switch stack. This switch stack get extended from time to time. Because of that, I have to create more sensors, that are bui...
Tue, 10 Jun, 2025 at 3:29 PM
I want to be able to create a Library that is basically the entire device tree, but filtered to only a specific sensor type, so that the sensors are shown in the hierarchy. I know I could do it manually, but it's very time consuming!
...
Tue, 10 Jun, 2025 at 3:29 PM
Dear Support Team,
Hello
Why don't snmp traffic sensors determine how much capacity a link has?
They just monitor how much traffic there is on a traffic link right now.
How can i find out that about an interface or a port channel or...
Tue, 10 Jun, 2025 at 3:29 PM
Hi Guys,
So I recently downloaded and installed PRTG in one of my machines. My aim is to see who is downloading how much data and who is consuming most of the bandwidth. After a bit of research I found that the best feature to use in my s...
Tue, 10 Jun, 2025 at 3:29 PM
Hi. I am creating a sensor S1. And a template device TD1. I add a dependency for the device on the sensor S1.
Via the API I clone the device many times. I check in the PRTG UI and the dependency is there, correctly set on S1 for all cloned ...
Tue, 10 Jun, 2025 at 3:29 PM
Is it possible to create a channel dependency in a lookup file?
I have a channel with an admin state and a channel with an operational state, that are both processed with two different lookup files. When the admin state is down, both channe...
Tue, 10 Jun, 2025 at 3:29 PM
Is it possible to change the size of the sensor icons on the map? We have location all over our country and when it is normally zoomed out we cant see it on a big screen at a far distance
Article Comments
Hello,
Thank you for ...
Tue, 10 Jun, 2025 at 3:29 PM
Hi,
We are essentially wanting to start again with our PRTG platform and therefore we want to delete all devices and clear all historic monitoring data.
I have found a few older articles -
https://helpdesk.paessler.com/en/support/solu...
Tue, 10 Jun, 2025 at 3:29 PM
Hi I have a constraint on the IPFIX sensors suddenly No data, but for the last 2 such sensors are still active. Please help
Article Comments
Did you already try to restart the PRTG Core Server service? If that doesn't help, ...
Tue, 10 Jun, 2025 at 3:29 PM
Hello,
i have created an custom powershell-script with xml-Output.
The script checks some Windows-Services and show it in seperate channels in the Sensor.
My Problem is, i don't know, how i must change my script, to execute the Script...
Tue, 10 Jun, 2025 at 3:29 PM
Would like the ability to pass windows variables to ping sensors. In my case I want to set the source (-S IP address) on a probe with multiple IPs/NICs, but I could see where other users would want to use other variables such as size, don&#...
Tue, 10 Jun, 2025 at 3:29 PM
How to setup HP 5400 series switch modules and power supply fault monitor?
Can not find correct OID
Article Comments
I have been searching for that as well. The tech doc they have posted works perfect for the older HP 54xx seri...
Tue, 10 Jun, 2025 at 3:29 PM
How can I enable actions telnet - ssh in PRTG network monitor - Device Context Menu (Device Tools) to allow access in Linux servers and routers cisco, through the command line interface on the Putty and KITTY applications?
Device Tools ...
Tue, 10 Jun, 2025 at 3:29 PM
I would like to present live, 2 day, 30 day SNMP traffic data on a web page, with the Summary Table just below each graph. Is this possible from the Map Designer? Or do I have to design a custom html to load the Summary Table. This is the t...
Tue, 10 Jun, 2025 at 3:29 PM
Hello!
My "server" on Win7 is crashed, where PRTG was installed. I was unable to start it. I still have a backup PRTG that the server regularly did on its own. I installed Windows 10 there and the latest version of PRTG. Now PR...
Tue, 10 Jun, 2025 at 3:29 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to use Prtg Desktop without it triggeri...
Tue, 10 Jun, 2025 at 3:29 PM
Hello,
Has anyone figure out a way to monitor the active SSL VPN user count on a SonicWall with PRTG?
This is one of the numbers that can be found under the User Monitor screen.
I've looked through the SonicWall MIB's for an OID ass...
Tue, 10 Jun, 2025 at 3:29 PM
I would like to ask if one can monitor a mail server by monitoring things like SMTP, SMTPS, IMAP, bop3, Start TLS.
Thanks in advance.
Article Comments
Hello Siddharth,
Thank you for your post.
Please see the following page f...
Tue, 10 Jun, 2025 at 3:29 PM
Hi, I've just trye to add a xerox versalink printer into prtg.
I'll choose the generic printer in the automatic discover mode and my printer information are ok.
I just have a little trouble when we have change the toner.
On the snm...
Tue, 10 Jun, 2025 at 3:29 PM
Is it possible to clone multiple devices/ sensors so that i can select that group and display them on a map, because it isnt possible to depict them all single. thanks in avance.
Article Comments
Why would you want to clone them...
Tue, 10 Jun, 2025 at 3:29 PM
Hello,
I've got a PowerShell script that grabs a count of SSL-VPN sessions from a Sonicwall.
The script runs fine, and when it exits, it exits as follows:
------------------------------------
{other script statements up here.......
Tue, 10 Jun, 2025 at 3:29 PM
I need to activate the prtg key in another installation because the current server is faulty.
For this, what should I do?
Article Comments
Hi there,
Therefore, please go to Setup | License and click Deactivate this License. Af...
Tue, 10 Jun, 2025 at 3:29 PM
Dear Support
I only want to monitor Ethernet physical interface, not other interface like interface vlan..... . I try to create template for auto discovery, but it don't work. Please support template for do this, many thanks.
Your l...
Tue, 10 Jun, 2025 at 3:29 PM
I want to use the SLA option for displaying my services in percentages. Where do i find this?
Thanks in advance.
Article Comments
Within PRTG itself, that's likely not possible - where exactly would you want to display that ...
Tue, 10 Jun, 2025 at 3:29 PM
My Probe Health sensor has not received data for almost 24 hours - it is just sitting there grey, I created a new sensor and that is working okay, but as I can't delete the "bad" sensor as it is a "fixed" object I wo...
Tue, 10 Jun, 2025 at 3:29 PM
Hello,
We support an organisation with multiple global sites, we would like to monitor Office 365 from every site to see if the key services are available. Getting some service response times would be even better..
- Email
- SharePoint
- ...
Tue, 10 Jun, 2025 at 3:29 PM
I would like to know if there is a syslog reciever and if yes if one can depict the results of this reciever in some form of a diagram.
Article Comments
Hi,
We only offer a syslog receiver sensor to monitor syslogs in PRTG. Pl...
Tue, 10 Jun, 2025 at 3:29 PM
Good morning,
currently I am monitoring on various servers whether a VMWare consolidation is pending.
For this I use a Powershell script, which I run on some servers every 24 hours.
Is there a possibility to add this script aut...
Tue, 10 Jun, 2025 at 3:29 PM
