kb.paessler.com
Welcome to the Paessler Knowledge Base Archive. Here, you will find articles from kb.paessler.com.Please note that this is a mere import of all questions and the corresponding replies into a new platform. The important articles were transfered manually - articles in this folder were imported automatically. We tried to keep links working, but some may fail. If you find some, please let us know. Please bear in mind that articles in this folder may contain old / outdated data.
Hi,
I'm using python script to create json output for a custom sensor. In the json output I set 'text' field and this works ok for most of my devices, most of the time. However sometimes the value of the 'text' field i...
Tue, 10 Jun, 2025 at 3:37 PM
I have a Red Hat enterprise server with disk mount points I need to monitor. Is there a way to monitor those mount points within PRTG?
Article Comments
Hello,
Thank you very much for using PRTG. I'm afraid there is no dir...
Tue, 10 Jun, 2025 at 3:36 PM
Good afternoon!
Please tell me - is it possible to combine summary data on sensors?
I have about 400 devices, each device has a syslog sensor.
is it possible to somehow make the resulting page where information was collected from all 400...
Tue, 10 Jun, 2025 at 3:36 PM
Receive an error message when testing email notification. Using the built in SMTP function (no external SMTP relay).
Have read previous posts but the answer to previous posts is just a link to the manual. If I could figure it out from t...
Tue, 10 Jun, 2025 at 3:36 PM
Buenos dias, tengo una pregunta, la base de datos de las graficas de un dispositivo se puede personalizar, no la del sensor y ni tampoco la de la interface, si no el host en si, y tambien donde puedo sacar la grafica de disponibilidad del h...
Tue, 10 Jun, 2025 at 3:36 PM
Hi, Dears,
In the first, I wish you safety in the light of these circumstances
On 22/5/2020 I upgraded my PRTG software to the last version and it was done successfully and worked fine, For two days I faced issues with search engines wh...
Tue, 10 Jun, 2025 at 3:36 PM
Is it possible to limit the amount of notifications sent by PRTG during a period of time? We have had a number of occasions where WMI will fail on a host that may have 12 WMI sensors and because the parent sensor for ping is still up we get...
Tue, 10 Jun, 2025 at 3:36 PM
Hi Team,
I need to fetch the list of thresholds\channel settings of all sensors configured in PRTG Tool.
I need to fetch the settings that were configured so that the infrastructure can be monitored more effectively and the tool can be ut...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
A third-party compagny will send me only a part of PRTG devices/sensors that I should be able to my PRTG.
I have read about full tansfer form a server to another but did not find abiut part only.
COuld you help.
No matter of urgency.
Be...
Tue, 10 Jun, 2025 at 3:36 PM
I am getting the followed error, and I've been trying different ways to solve it with no result.
Error sending Email:
Status sending Email: DNS Server: x.x.x.x E-Mail: "xxxxxx@xxx.com". No MX records for the domain xxxxxx.c...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
i want to create a Dashboard with only Erros visible on a Map Editor in PRTG.
There is already under Datatable a table with all Errors and confirmed Errors.
This sample is already good, but the question is, can i remove the confirmed ...
Tue, 10 Jun, 2025 at 3:36 PM
For a project concerning the monitoring of 10 temperature sensors, I would like to use a map which would show the individual values of each sensor but also the limit warning values for them.
I found different map objects which can fit to ...
Tue, 10 Jun, 2025 at 3:36 PM
HI
We are implementing UCS/ACI and Hyperflex Kit from Cisco, and wondered whether there were any specific sensors/MIBs we could use to monitor this equipment?
Thanks
Article Comments
Hi there,
PRTG comes with the SNMP Cisc...
Tue, 10 Jun, 2025 at 3:36 PM
Guten Tag,
Leider bekomme ich beim Versand von SMS immer folgendes Ticket von PRTG:
{{{* Achtung: Es gibt ein Problem und Sie müssen etwas tun! *
Die SMS-Nachricht an 079XXXXXXX konnte nicht zugestellt werden. Es ist sehr wichtig, dass ...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
i need to setup sensor to monitor last update to a sql table, and monitor / error if over 24 hrs old..
eg sql :
SELECT TOP 3 [LastSync]
FROM [database].[application].[table]
order by LastSync desc
result:
LastSync
2020-06-05 19:3...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
I've successfully created a test Python script for PRTG however I faced a few problems along the way. The documentation in the KB (https://www.paessler.com/manuals/prtg/custom_sensors) seems to be focused on everything other than ...
Tue, 10 Jun, 2025 at 3:36 PM
Dears,
Please be informed that I Face Jump issue in all graphs of PRTG and this issue repeated daily for 20 Min then it back normal.
Please I need your advice here.
Article Comments
Hello,
Thank you for your KB-post.
Ar...
Tue, 10 Jun, 2025 at 3:36 PM
Hello Team,
I got an GoDaddy SSL certificate. GoDaddy offered the code for a seal in the footer for my public websites.
Is that possible? Can I modify the PRTG footer with a GoDaddy seal? If yes, can you help me?
Article Comments
...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
I have my TP-Link T2500G-10TS (TL-SG3210) but unfortunately I get a hard time to add it to PRTG. Is their any guide on how to add my switch on my PRTG? Do I need to import the MIBs file of T2500G-10TS (TL-SG3210) to PRTG? Take note th...
Tue, 10 Jun, 2025 at 3:36 PM
hi admin
I just migrated a PRTG server.
From the old PRTG, I copied the database monitoring file to complete the existing data record to copy the new migration server.
The strangeness arises when I look at historical data in May complete gr...
Tue, 10 Jun, 2025 at 3:36 PM
Hi,
Im struggling with how a should monitor my Windows VMs in vmware. I have my vcenter in PRTG with all my VMs and the metrics from there. But i also have my Windows VMs monitored via WMI. It feels like i am monitoring everything twice.
...
Tue, 10 Jun, 2025 at 3:36 PM
can you use Group Managed Service Accounts in PRTG and if so what is the process?
Article Comments
Hello Roger,
I'm afraid that Group Managed Service Accounts are not supported by PRTG. We will look for new authentication ...
Tue, 10 Jun, 2025 at 3:36 PM
Currently we are using a virtual machine dedicated for PRTG.
Moving the virtual machine between different HyperVisors will generate activation problems on the product.
Basically what we want its a replica of the PRTG virtual machines betw...
Tue, 10 Jun, 2025 at 3:36 PM
How can i priorize an sensor if it is in idle state cause of license restriction?
This sensor schould always be monitored and other sensors schould become idle if the license will be exceeded.
Article Comments
Hello there,
Y...
Tue, 10 Jun, 2025 at 3:36 PM
Hi
I would love to have a Sensor to monitor the IBM v series storage platform, IO performance , throughput and health status.
Thanks
Article Comments
Hi Marco,
Please take a look at these two articles:
Topic 74535
To...
Tue, 10 Jun, 2025 at 3:36 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story and Details of User Story
As a PRTG User, I want to add groups...
Tue, 10 Jun, 2025 at 3:36 PM
Probe Device Probe Health (Probe Health) Down (200 % Delay (Interval Delay WMI) is above the error limit of 100 % Delay in Interval Delay WMI. How fix this problem, thx
Article Comments
Hello naab,
Please see this article for...
Tue, 10 Jun, 2025 at 3:36 PM
On Win 8.1 I get this Error. How can I solve the problem?
PrimaryModule C:\Program Files (x86)\PRTG Network Monitor\64 bit\PRTG Server.exe cannot be loaded. LoadLibraryEx returns 2.
- <Event xmlns="http://schemas.microsoft.com/w...
Tue, 10 Jun, 2025 at 3:36 PM
Want this feature implemented? Please upvote! Posts in this thread won't be published. Read Me!
User Story
As a PRTG User, I'd like to monitor my Nutanix environment with PRTG. They have an awesomely documented REST API we ...
Tue, 10 Jun, 2025 at 3:36 PM
The customer needs to generate a memory report and the Channel only displays Available Memory, It is known to select the Channel to be displayed through Select Sensors Manually--Objects,
However, if a lot of customer equipment is time-consu...
Tue, 10 Jun, 2025 at 3:36 PM
Feature Request: possibility to choose reports to be in 'one' PDF, instead of forced to split it into several PDF.
We use the reports for following up on uptime, and instead of having multiple PDF documents, It could be nice to h...
Tue, 10 Jun, 2025 at 3:36 PM
Is there a way to do it with outlook?
Article Comments
Hi there,
you could try adding filter rules for the representing status words like:
- "Down"
- "Warning"
- "Up"
Kind regards,
Andrea...
Tue, 10 Jun, 2025 at 3:36 PM
Hallo zusammen,
Ich habe mir ein Custom Sensor erstellt, welcher den Wert von einem CMD Skript anzeigen soll.
Das CMD sieht in etwa so aus:
@echo off
for /f "tokens=2" %%i in ('curl --insecure --silent --output nul -x http...
Tue, 10 Jun, 2025 at 3:36 PM
I have already looked at the Python script but I can't cope with it because I don't speak this language.
According to Mailstore, there is also the option to access the Mailstore API via powershell.
I only need the archiving task...
Tue, 10 Jun, 2025 at 3:36 PM
Dear, good morning, how are you? We have a very serious problem, our installation has about 6 thousand sensors, where we have 1 local probe and 3 remote ones, any problem we have on the server where there is the local probe and coreserve ex...
Tue, 10 Jun, 2025 at 3:36 PM
how to get script to check the age of the installed signature database of McAfee endpoint security?
Article Comments
Hello Tacio,
Thank you for your post.
Please see the following KB article for a script and instructions on ...
Tue, 10 Jun, 2025 at 3:36 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to revert an old interface. I started u...
Tue, 10 Jun, 2025 at 3:36 PM
How can I do a simulation of sensor failure
Article Comments
Hello PRTG_LEO,
from the context menu (either top-right corner, or via right-click on the sensor name) you get the option to simulate an error.
In order to clear t...
Tue, 10 Jun, 2025 at 3:36 PM
Is anyone doing full monitoring of a Dell PowerVault? I see there's disk sensors for it, but what about monitoring the controllers and network ports? Is there a way to monitor these in PRTG?
Article Comments
GrdLock,
At th...
Tue, 10 Jun, 2025 at 3:36 PM
After creating a exchange mailbox sensor for a specific mailbox with 3 mails in "deleted mails" folder and no other mails in other folders the sensor shows that 117 mails ("Anzahl E-Mails") have been found in the mailbox...
Tue, 10 Jun, 2025 at 3:35 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to be able to customize reports natively ...
Tue, 10 Jun, 2025 at 3:35 PM
I have been asked to set some warning and alarm levels onto a Router Uptime Sensor. The uptime is currently measuring for example 249d.
I have been asked to Alarm if its less than 2 hours uptime, Warn if between 2hrs and 40 hours and Green ...
Tue, 10 Jun, 2025 at 3:35 PM
Please Help
Article Comments
Dear rux,
in this case, please disable the NPCAP installation/update. The packet sniffer sensor will then no longer functional, but all other parts of PRTG work.
Jun, 2020 - Permalink
Tue, 10 Jun, 2025 at 3:35 PM
Hi Guys
i'm trying to get the Snapshot state of my VMs monitored in PRTG.
We just upgraded our ESXi Environment to 6.5.
Before the Upgrade everything worked fine. But now i'm getting Errors with the old Skript.
I had to upgrade...
Tue, 10 Jun, 2025 at 3:35 PM
Hello,
I have created a factory sensor that accumulate several bandwidth sensors, how can i change the display of the bandwidth shown in the graph from Kbit/s to mbit/s ?
I tried to change it on the sensor's parent device but it didn...
Tue, 10 Jun, 2025 at 3:35 PM
Dear support team,
As far as i know from PRTG documents, remote probes can save collected data for a short while, when their connection to core server has been lost.
But i never see this function in my case.
Does it need to any config? O...
Tue, 10 Jun, 2025 at 3:35 PM
Hi
can some one help with monitoring all process CPU usage and view hystoric data then?
thnx
Article Comments
Hi there,
You can use the Windows Process Sensor to monitor processes of your choice. This sensor has got a chan...
Tue, 10 Jun, 2025 at 3:35 PM
same as above. As one of Azure windows VM unexpectedly crashed at 100% of CPU on the other day, event log shows nothing goes down, just wondering if sensor can tell any cause of it. Thanks.
Article Comments
Hi there,
the Windo...
Tue, 10 Jun, 2025 at 3:35 PM
Hi,
We would like to monitor an entire subnet. We don't exactly which devices will be connected, but we will gradually find them out with an auto-discovery that will run every hour.
However, it looks like PRTG is unable to solve the d...
Tue, 10 Jun, 2025 at 3:35 PM
Hi Team,
We have many devices on our organization that must send logs to one syslog server centralized.
If i have 10 devices on PRTG then i must create one sensor syslog receiver by device, and this is a lot.
Please there is any solution ...
Tue, 10 Jun, 2025 at 3:35 PM
intermittent ping issue from PRTG Server on AWS.
the same IP i am able to ping from other Server I have on other subnet on AWS.
command prompt also not able to ping
Article Comments
Hello Sim Ling Fong,
if you can't ping f...
Tue, 10 Jun, 2025 at 3:35 PM
We use the dynamic geographical maps for our deployment quite a bit because we are a WISP and our equipment is geographically spread out. Many of our users have stared adopting PRTG-Desktop but I cannot find a way to use the geographical m...
Tue, 10 Jun, 2025 at 3:35 PM
Hi,
Whenever I try to add a Windows Network Card type sensor, I get the following error (or very similar to it, depending on the machine):
Failed to find valid network cards. Interface names ['Microsoft Virtual Machine Bus Network A...
Tue, 10 Jun, 2025 at 3:35 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want an additional Parameter in the Scanning...
Tue, 10 Jun, 2025 at 3:35 PM
Hello,
I want to monitor it a .exe is not running.
This exe open a cmd window who need to run constantly
I saw on google that in need to set the "WMI service" sensor.
I added the sensor on the correct computer, with the co...
Tue, 10 Jun, 2025 at 3:35 PM
Hello
I'm looking to setup a WMI Event Log Monitor sensor which alerts me to any 'critical' events.
However there's no critical event type for me to choose, only error, warning, information, etc.
Is anybody able to offer...
Tue, 10 Jun, 2025 at 3:35 PM
We would like to enable PRTG for external access so we can use the IOS smartphone app to monitor our infra? Currently we access it internally only.
What is the way to setup?
Thanks
Article Comments
Hello there,
You need ...
Tue, 10 Jun, 2025 at 3:35 PM
Hi,
Many notification templates can be created in PRTG. Even though there is a main one in most cases, which is applied to all sensors (tipically for notifications to the PRTG Admin), some of them might be applied to specific machines onl...
Tue, 10 Jun, 2025 at 3:35 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG User, I want to see sensor/channel historical metric...
Tue, 10 Jun, 2025 at 3:35 PM
I configured PRTG to send notifications by e-mail, but when I check the logs I see the following message:
"Status sending Email: DNS Server: x.x.x.x E-Mail: cliente@cliente.com.br. Connection Closed Gracefully".
Could you help m...
Tue, 10 Jun, 2025 at 3:35 PM
I still get an error message when I try to use an image in the background of the map, see below:
undefinedServer: 158.166.176.171
URL: /editsettings?[object FormData]
Time: 16:13:28
Any help is welcome
Article Comments
Hello F...
Tue, 10 Jun, 2025 at 3:35 PM
Dear, good morning we have a website that shows the old certificate that has been expired for a long time, when I try to add the sensor again it takes the thumb print of the old one, how to solve this issue?
Article Comments
Dan...
Tue, 10 Jun, 2025 at 3:35 PM
Recently, create an SSL certificate sensor or the device you create has 4 certificates, but the PRTG can identify, how to manage sensors for other certificates?
Article Comments
Hi,
The sensor monitors the certificate which is...
Tue, 10 Jun, 2025 at 3:35 PM
I have an IP on DNS blacklist sensor and I want to make sure it is using the private IP. Does the sensor default to private or public and how can I check this?
Article Comments
The sensor uses the IP address or DNS-hostname conf...
Tue, 10 Jun, 2025 at 3:35 PM
Seems, the only advice on Paessler KB for weather monitoring is to add some iFrame on a map. I wanna share my experience with "HTTP XML/REST Value" sensor.
Recently I found a post about Yandex.Weather providing its data in XML:
...
Tue, 10 Jun, 2025 at 3:35 PM
Hi,
I would love to know if it is possible to do the following:
Switch A has multiple VLANS.
We need to calculate how many GB per day has been sent/recieved.
We have the traffic total in the Network Card sensor (via SNMP) but is it po...
Tue, 10 Jun, 2025 at 3:35 PM
We need certain "When sensor state is Up for at least ... seconds, perform" instead of ambiguous "When sensor leaves Down state after a notification was triggered, perform" (where a state can be Unknown, Unusual, etc.) i...
Tue, 10 Jun, 2025 at 3:35 PM
Hallo,
we have Updated our PRTG few days ago to ver. 20.2.59.1689. Our Linux Servers with Linux Ubuntu 32 bit Ver. 12.04.4 LTS and Linux Ubuntu 32 bit Ver. 12.04.5 LTS giving the error code PE094. The device you want to monitor is not com...
Tue, 10 Jun, 2025 at 3:35 PM
Hello everyone,
I'm currently on the task of getting our printers monitored in prtg. I noticed that the pagecounter in the OID differs from the pagecounter on the Web-UI (or the printed configuration sheet) of the printer.
That happ...
Tue, 10 Jun, 2025 at 3:35 PM
Hello Paessler,
I am using the "HTTP Push advanced data" sensor in order to graph values coming from an XML file.
My issue is that for each value in the XML file there is also the time when the value had been recorded and it&...
Tue, 10 Jun, 2025 at 3:35 PM
Hi,
I am wondering if there is anyway I can export a server then import those settings into new PRTG installation? I do not have any any real privileges on the source serve except read, meaning I can see and monitor my devices but I can'...
Tue, 10 Jun, 2025 at 3:35 PM
I use the SSH disk free sensor to monitor the free disk space of mounted devices on a Xen server. This works perfectly with NFS shares, but how can I read out the free disk space of iSCSI connected drives?
Article Comments
This ...
Tue, 10 Jun, 2025 at 3:35 PM
Afternoon all,
I have something I have been struggling with. I am monitoring a device using the https advanced (beta) sensor. I get a json response formatted like so:
[
{
"name": "name 1 ",
&quo...
Tue, 10 Jun, 2025 at 3:35 PM
Hi there,
I tried to do this:
4:COMMCORP[mbit]
channel(2278,0)
But only the name of the unit changes. The data keeps been showing in Kbit/s. I want it to change to Mbit/s. Is it not possible?
Article Comments
Hello,
...
Tue, 10 Jun, 2025 at 3:35 PM
I want this feature implemented, too? Please upvote by clicking Thumbs up!
User Story
As a PRTG User, I want to add a feature into comment section. The idea is to have a time mark when each comment its added.
Details of User Story
...
Tue, 10 Jun, 2025 at 3:35 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG Admin I would like to use a native Sensor to monitor...
Tue, 10 Jun, 2025 at 3:35 PM
Once I applied the Microsoft Windows 204 update, the custom port for the webserver fails to work (reverts back to 443) whenever PRTG is rebooted/restarted.
I have to manually go in and change the port number AND then press "Save"...
Tue, 10 Jun, 2025 at 3:35 PM
Hi. I have some program, that i want to get monitoring information from my semsors in prtg by snmp? can i do this? If there is mib for prtg?
Article Comments
Hello,
Thank you for your post.
Can you please describe your inqui...
Tue, 10 Jun, 2025 at 3:34 PM
Hi
I have over one thousand sensors and I need to edit the tags on all of them. Is there a way of editing them all at once rather than going through each sensor? Is it also posible to run a report showing what tags are in use whith which se...
Tue, 10 Jun, 2025 at 3:34 PM
Hi all,
first of all Im new to PRTG.
I want to add sensor to a device automatically with script, its doesnt matter for me on of those-: Python/batch/PS, is that possible ? if yes how?
I can add Custom Sensor, but I have to add that ...
Tue, 10 Jun, 2025 at 3:34 PM
Hi.
I want to see an AD user in two groups, one group of admins, and one for specific notifications.
Is this possible to accomplish?
Thanks.
Article Comments
Hi there,
Thank you for your message.
That should be possi...
Tue, 10 Jun, 2025 at 3:34 PM
Hi All
We are currently having a problem where we have 4 scheduled task running on a server whose sensors are always saying down this is due to the Remote Registry Service not being active. I know these scheduled tasks are actually worki...
Tue, 10 Jun, 2025 at 3:34 PM
Afternoon all, I need to put together some information on the number of sensors we are monitoring at the moment compared to previous dates eg start of the month and start of May.
I am taking a presumption that I will need to create a repo...
Tue, 10 Jun, 2025 at 3:34 PM
Hello Guys,
I'm currently work on creating a network plan for my Company. I want it to show a Line between 2 Devices, which displays the ping between these 2.
Is there a possible solution for that?
Thanks in advance!
Arti...
Tue, 10 Jun, 2025 at 3:34 PM
Hi,
Can we add additionally bought 500 sensors into an already existing installation of 2500 sensors? If yes, what is the procedure to do so?
Also, when purchasing sensors with maintenance licence, what happens to the previously bought se...
Tue, 10 Jun, 2025 at 3:34 PM
Hello,
I have only one map created within PRTG administration interface (version 20.2.59.1689+).
The 'clone' option (as described here) is missing at the end of the map's line.
See screenshot here. Is this a bug or did I m...
Tue, 10 Jun, 2025 at 3:34 PM
My issue slightly differs from missing adapters in that thread: https://helpdesk.paessler.com/en/support/solutions/articles/64343-not-all-network-adapters-available
Got few Server 2019 Hyper-V hosts running Switch Embedded Teaming over tw...
Tue, 10 Jun, 2025 at 3:34 PM
Want this feature implemented, too? Please upvote by clicking Thumbs up!
(Posts as a reply won't be published in this feature request thread. Read Me!)
User Story
As a PRTG Administrator, I want to be able to run a report tha...
Tue, 10 Jun, 2025 at 3:34 PM
Hello all,
I am using PRTG API to get all the Sensors With Alarms. I am calling it from my PHP application via AJAX.
https://MYSERVER/api/table.xml?id=0&filter_status=13&username=username&passhash=00000000
I am getting f...
Tue, 10 Jun, 2025 at 3:34 PM
Auto update has stopped working for me on a few site the I help mange. When an auto update install runs, both the core and probe services are stopped, the install fails in some fashion and the services remain stopped. The services can be ...
Tue, 10 Jun, 2025 at 3:34 PM
Hi,
I am trying to pull all sensor channel information by using power shell script but its only giving me Upper and lower error limits. i need upper and lower warning also
can you please help me on this
UpperErrorLimit LowerErrorLimit
...
Tue, 10 Jun, 2025 at 3:34 PM
Hi,
Does anyone know how to get the storage left on the timecapsule with SNMP , SNMP is enabled but no sensor is working.
Kind regards,
Joni
Article Comments
Hello Joni,
Thank you for your post.
You could use our SNMP ...
Tue, 10 Jun, 2025 at 3:34 PM
Is it possible to connect the STE2 from Hw-group to the PRTG monitoring tool ?
It is this product: https://www.hw-group.com/device/ste2
The reseller told me that this device only supports SNMP and does not support SNMP traps.
Do I need t...
Tue, 10 Jun, 2025 at 3:34 PM
Hello,
I would like to get the world map where all my devices and their states are shown. These devices don't have anything I could ping nor any OS, so they way I have to do it is to call the API to set the device's location by en...
Tue, 10 Jun, 2025 at 3:34 PM
Sehr geehrte Damen und Herren,
wenn ich im WEB-Interface die Seite Alle Geräte aufrufe wird oben rechts IMMER ein Tipp von PRTG angezeigt.
Dies stört ungemein! Kann ich dieses verhalten ändern?
Article Comments
Hallo Herr Buerge...
Tue, 10 Jun, 2025 at 3:34 PM
I am trying to determine where PRTG stores the saved credentials for the sensors. I have read the document on "How and where does PRTG store its data?", but was still unable to find this. I checked the configuration.dat file and...
Tue, 10 Jun, 2025 at 3:34 PM
Hi All,
In our monitoring setup we know that some sensors goes in down state while the ops team is off-duty. These sensor might be down for 5 min, and we only notify on-call after 15 min.
I what to review all sensors that have transitio...
Tue, 10 Jun, 2025 at 3:34 PM
Hallo,
ist es möglich das mir ein Bild aus einem Netzwerkpfad oder aus den Iconsets als Mousover anzeigen zulassen.
Das ist ich pflege ein Gerät in eine Map ein und als Bild möchte ich den genauen Standort anzeigen lassen und das wenn i...
Tue, 10 Jun, 2025 at 3:34 PM
I have a Cisco Catalyst 2960 switch sending syslog messages to PRTG. I would like to stop getting alerts on interface UPDOWN events (i.e. if a computer is rebooted, powered off, unplugged, etc.).
The default configuration of the PRTG Sysl...
Tue, 10 Jun, 2025 at 3:34 PM
Hello,
i have created a powershell exexml sensor.
The Problem is if the user is logged on to the Probeserver, the sensor works.
Is the User logged of I get an access denied back. Permissions were checked and no problems were found. It w...
Tue, 10 Jun, 2025 at 3:34 PM
